High temperature low cycle fatigue tests at various strain amplitudes (±0.5%,±0.6%,±0.8%,±
1.0%) and strain rates (0.5%/s, 0.05%/s, 0.005%/s) were performed at 550° C. The stress …

Abstract Effects of strain amplitude on the isothermal fatigue (IF) and thermomechanical
fatigue (TMF) behaviors of 316LN stainless steel were comparatively studied. The physical …

This work studied the uniaxial, torsional and multiaxial low cycle fatigue behavior of 316LN
stainless steel at 550° C. Results show that the normalized kernel average misorientation …

Continuous and interrupted LCF tests were conducted to reveal the effects of temperature,
strain rate and strain amplitude on the LCF behavior of a nitrogen-alloyed 316LN stainless …

Abstract Effects of multiaxial loading on the isothermal fatigue (IF) and thermomechanical
fatigue (TMF) behavior of 316LN stainless steel were comparatively studied. Results …

In this study, the influence of hot wire tungsten inert gas (HW-TIG) welding and Activated-TIG
(A-TIG) welding on the microstructure and mechanical properties of type 316LN stainless …

Thermomechanical fatigue (TMF) behavior of nitrogen enhanced 316LN stainless steel (with
0.14 wt.% N) is investigated under in-phase (IP) and out-of-phase (OP) conditions at cyclic …

Austenitic stainless steels are suitable choice for nuclear power plant components due to
their excellent creep strength, desirable mechanical properties, and corrosion resistance …

This paper depicts nuances of atomistic level characterization of (Fe, Cr) 2 B crystal in a high
B containing P91 steel using probe aberration-corrected Scanning Transmission Electron …

Abstract Hot wire Gas Tungsten Arc Welding (GTAW) process is considered in addition to
conventional cold wire GTAW process for the manufacture of Steam Generators (SG) for …