Abstract Construction and Demolition (C&D) waste is solid wastes generated from the
construction, demolition, and renovation activities that constitute almost 30–40% of globally …

Landfill leachates are complex mixtures containing very high concentrations of
biodegradable and recalcitrant toxic compounds. Understanding the major contaminant …

Over the past few decades, the world is facing critical water supply problems caused by the
relentless increase of global human populations and the associated rise of anthropogenic …

The present research was performed with a primary objective to study the performance of
different MnO 2 polymorphs for oxidative transformation of As (III). Five different MnO 2 …

Along with the increase of autoclaved aerated concrete (AAC) production, the amount of
scrap waste (industrial by-products) is increasing. AAC waste, however, is not yet being fully …

The management of construction and demolition waste (CDW) and its correct final
destination has become a global problem due to the growth of urbanization. At the same …

This study focuses on treating Acid Mine Drainage (AMD) using Recycled Concrete
Aggregate (RCA) as a cost-effective and environmentally friendly material. RCA is utilized …

This study investigated the simultaneous removal of Cd 2+ and Pb 2+ from wastewater using
commercially available Japanese zeolite (JPZ) and its mixtures. A series of batch adsorption …

This study investigated the applicability of industrial by-products such as steel slag (SS) and
autoclaved aerated concrete (AAC) grains (< 0.105, 0.105–2, 2–4.75 mm) as low-cost …

Cuprous oxide-modified diatomite waste (Cu 2 O-DW) as a low-cost and effective adsorbent
was prepared via a hydrothermal route combined with acid-alkali treatment. The …