A TiO 2–ZnO binary oxide system (with molar ratio TiO 2: ZnO= 8: 2) was synthesized by a
hydrothermal method, assisted by calcination at temperatures of 500, 600 and 700° C, using …

The TiO 2 ceramics were prepared by a solid-state reaction in the temperature range of 920–
1100° C for 2 h and 5 h using TiO 2 nano-particles (Degussa-P25 TiO 2) as the starting …

Dense TaTiP 3 O 12 ceramics were synthesized by the solid-state method and spark plasma
sintering (SPS) with 6 wt% V 2 O 5 as a sintering aid, and their phase, microstructure …

Abstract Nanocomposite, 0.5 BaFe 12 O 19–0.5 Bi 2/3 Cu 3 Ti 4 O 12 (BHF–BCT) has been
fabricated via chemical method. The phase confirmation and morphology of the synthesized …

微波器件的高频化, 片式化和多功能化是通信技术中重要的发展方向, 超低损耗(高Q 值)
的低温烧结微波介质陶瓷是LTCC 技术的关键材料, 其中ZnO-TiO2 系微波介质陶瓷备受关注 …

The microstructure properties and grain growth kinetics of ZnO-B 2 O 3-TiO 2 ceramics with
0.5 and 1 mol pct doping of TiO 2 were investigated. The samples were sintered at 1373 K …

This paper reports the synthesis of Zn0. 8Mg0. 2TiO3 with V2O5 addition by means solid
state-reaction method and their dielectric properties. Effects of sintering temperature with …

Si3N4 ceramic foam is one of the ceramic materials and can bear high temperature. It is
used in the manufacturing industry, aerospace industry, and other fields. Protein was chosen …

A TiO2–ZnO binary oxide system (with molar ratio TiO2: ZnO= 8: 2) was synthesized by a
hydrothermal method, assisted by calcination at temperatures of 500, 600 and 700 C, using …

ABSTRACT The SnO2@ ZnO composites, with Sn/Zn molar ratio (Sn/Zn–ratio) from 4: 1 to 8:
1, were successfully prepared via two–step hydrothermal method. The microstructure and …