The iron aluminides discussed here are Fe–Al-based alloys, in which the matrix consists of
the disordered bcc (Fe, Al) solid solution (A2) or the ordered intermetallic phases FeAl (B2) …

Iron aluminides are still deeply investigated materials for their use in power plants,
automotive and chemical industry, and other sectors. This paper shows that it is possible to …

Copper-based powder metallurgy materials are frequently utilized in fabricating brake pads
for high-speed trains. The preparation process involves mixing, ball milling, pressing, and …

The short-term isothermal oxidation behavior of B2 FeAl alloys doped with different reactive
elements (REs) at 1273 K was investigated. All the RE-doped alloys showed retarded phase …

The paper presents the results of studying the structural properties of Ni nanotubes affected
by thermal annealing. Scanning electron microscopy, X-ray phase analysis and energy …

FeAl based alloys with carbon and titanium additions were prepared using arc induction
melting and their effect on wear behaviour was investigated using ball-on-disk technique …

To improve the bonding strength of carbon/carbon (C/C) composites and GH3044 nickel-
based superalloy, the bonding interlayer with Ti/Ni/Cu/Ni multiple foils were prepared by a …

Abstract 50Al-25Cu-25Fe (at.%) powders were milled for 0.5 h and subsequently annealed
at 600, 750 and 900° C for 0.5 h in a vacuum furnace. X-ray diffractometery (XRD) results …

The paper presents a structural and mechanical characterization of oxide layer obtained on
Ti-6Al-7Nb alloy in the process of isothermal oxidation (TO). The oxidation was carried out at …

ABSTRACT Specimens of Fe–Ni–Cr based Alloy 800 were subjected to atmospheric plasma
spraying using aluminum powder. Quantitative microscopic analysis of as-sprayed …