A 0.3–1.2 V schottky-based CMOS ZTC voltage reference
A voltage reference based on MOSFETs operated under Zero Temperature Coefficient
(ZTC) bias is proposed. The circuit operates in a power supply voltage range from 0.3 V up …
(ZTC) bias is proposed. The circuit operates in a power supply voltage range from 0.3 V up …
MOSFET ZTC condition analysis for a self-biased current reference design
In this paper a self-biased current reference based on Metal-Oxide-Semiconductor Field
Effect Transistor (MOSFET) Zero Temperature Coefficient (ZTC) condition is proposed. It can …
Effect Transistor (MOSFET) Zero Temperature Coefficient (ZTC) condition is proposed. It can …
An improved source follower per detector ROIC for HgCdTe infrared photodiodes
M Dangi, RS Saxena, V Niranjan - Microsystem Technologies, 2022 - Springer
A new readout circuit for HgCdTe based Infrared photodiodes has been proposed. In this
work, the conventional source follower per detector (SFD) architecture of the readout …
work, the conventional source follower per detector (SFD) architecture of the readout …
A 0.85 V CMOS voltage and current reference using SCCTs
THP de Castro, RL Moreno… - 2021 19th IEEE …, 2021 - ieeexplore.ieee.org
A new circuit topology of a voltage and current reference using self-cascode composite
transistors and operating with a minimum supply voltage of 0.85 V is proposed in this work …
transistors and operating with a minimum supply voltage of 0.85 V is proposed in this work …
A 2.25 ppm/° C High-Order Temperature-Segmented Compensation Bandgap Reference
S Jia, T Ye, S Xiao - Electronics, 2024 - mdpi.com
This paper presents a bandgap reference (BGR) with high-order temperature-segmented
compensation. The compensation signal is generated using the voltage difference between …
compensation. The compensation signal is generated using the voltage difference between …
5 V Supply Resistorless Voltage Reference for Low Voltage Applications
The analysis and design of a resistorless sub-bandgap voltage reference using a Schottky
diode instead of a bipolar junction is presented. It is a self-biased circuit and works in the …
diode instead of a bipolar junction is presented. It is a self-biased circuit and works in the …
A computer-aided approach for voltage reference circuit design
F Olivera, A Petraglia - Analog Integrated Circuits and Signal Processing, 2016 - Springer
This work presents a computer-aided design (CAD) approach for voltage reference circuits
by controlling main characteristics, such as temperature coefficient, power consumption …
by controlling main characteristics, such as temperature coefficient, power consumption …
5 V Supply Voltage Reference Based on the MOSFET ZTC Condition
The continuous scaling of CMOS devices has required the consequent reduction of the
supply voltages. There is a need for analog and RF circuits able to operate under at supplies …
supply voltages. There is a need for analog and RF circuits able to operate under at supplies …
A Comprehensive Study of Different Techniques for Voltage References
In the analog and mixed-signal integrated circuits, voltage references that are independent
of various factors such as temperature drift, noise, supply voltage, etc., and efficient in terms …
of various factors such as temperature drift, noise, supply voltage, etc., and efficient in terms …
A Low Supply Voltage Current and Voltage Reference Using Self–Cascode Composite Transistor
T Castro, RL Moreno, DM Colombo - Journal of Integrated Circuits and …, 2024 - jics.org.br
In this work, a new circuit topology for a voltage and current reference that operates with a
minimum supply voltage of 0.8 V and uses self-cascode composite transistors is discussed …
minimum supply voltage of 0.8 V and uses self-cascode composite transistors is discussed …