Energy field assisted metal forming: Current status, challenges and prospects
To meet the various and critical manufacturing requirements including high precision, low
cost, good manufacturability, and more demanding from product service and performance …
cost, good manufacturability, and more demanding from product service and performance …
Consolidation–microstructure–property relationships in bulk nanoceramics and ceramic nanocomposites: a review
A Mukhopadhyay, B Basu - International Materials Reviews, 2007 - Taylor & Francis
The recognition that bulk nanoceramic materials, having grain sizes typically 100 nm or
finer, possess appealing mechanical, physical and tribological properties has generated …
finer, possess appealing mechanical, physical and tribological properties has generated …
[HTML][HTML] Revealing the pulse-induced electroplasticity by decoupling electron wind force
Micro/nano electromechanical systems and nanodevices often suffer from degradation
under electrical pulse. However, the origin of pulse-induced degradation remains an open …
under electrical pulse. However, the origin of pulse-induced degradation remains an open …
Mechanism of void healing in cold rolled aeroengine M50 bearing steel under electroshocking treatment: A combined experimental and simulation study
M50 bearing steel, as the important material used in aeroengine bearing, exhibits low cold
working capacity with high susceptibility to produce voids. This would lead to the …
working capacity with high susceptibility to produce voids. This would lead to the …
Recent advances and challenges in electroplastic manufacturing processing of metals
L Guan, G Tang, PK Chu - Journal of materials research, 2010 - Springer
Electroplastic manufacturing processing (EPMP) is a relatively new metal-forming process
that is energy efficient, environmentally friendly, and versatile. In particular, it can be used to …
that is energy efficient, environmentally friendly, and versatile. In particular, it can be used to …
Effects of dynamic electropulsing on microstructure and elongation of a Zn–Al alloy
YH Zhu, S To, WB Lee, XM Liu, YB Jiang… - Materials Science and …, 2009 - Elsevier
The effects of the electropulsing on microstructural evolution and on the elongation of the
ZA22 alloy were studied during tensile deformation. The microsturctural evolution was …
ZA22 alloy were studied during tensile deformation. The microsturctural evolution was …
Nanocrystalline cemented carbides sintered by the pulse plasma method
A Michalski, D Siemiaszko - International Journal of Refractory Metals and …, 2007 - Elsevier
Nanocrystalline WC-12wt.% Co was consolidated by the pulse plasma sintering (PPS)
method at various temperatures between 900 and 1200° C under a pressure of 60MPa for …
method at various temperatures between 900 and 1200° C under a pressure of 60MPa for …
Recovery of tensile properties of twinning-induced plasticity steel via electropulsing induced void healing
The effects of electropulsing treatment (EPT) and annealing on the tensile behaviors of
twinning-induced plasticity (TWIP) steel after interrupted tension are compared. It is found …
twinning-induced plasticity (TWIP) steel after interrupted tension are compared. It is found …
[HTML][HTML] Microstructure evolution and deformation behaviors of pulse electro-assisted deformation in M50 bearing steel
M50 bearing steel, as a typical high-carbon and high-alloy steel, exhibits low cold working
capacity with high susceptibility to produce voids during the ring rolling process. In this …
capacity with high susceptibility to produce voids during the ring rolling process. In this …
The effect of electric current on dislocation activity in pure aluminum: A 3D discrete dislocation dynamics study
Introducing electric current into metals and alloys to improve their ductility and to reduce the
hardening tendency has been widely adopted. Nevertheless, how the electricity affects the …
hardening tendency has been widely adopted. Nevertheless, how the electricity affects the …