Application of vegetable oil-based metalworking fluids in machining ferrous metals—a review
The increasing attention to the environmental and health impacts of industrial activities by
governmental regulations and by the growing awareness level in the society is forcing …
governmental regulations and by the growing awareness level in the society is forcing …
Micromanufacturing of composite materials: a review
Composite materials exhibit advantages from the combination of multiple properties, which
cannot be achieved by a monolithic material. At present, the use of composite materials in …
cannot be achieved by a monolithic material. At present, the use of composite materials in …
[HTML][HTML] Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder …
Abstract Properties of metal matrix composites (MMCs) are affected by various process
variables such as particle size of powders, the proportion of reinforcement material, mixing …
variables such as particle size of powders, the proportion of reinforcement material, mixing …
Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method
In this work, the dry turning parameters of two different grades of nitrogen alloyed duplex
stainless steel are optimized by using Taguchi method. The turning operations were carried …
stainless steel are optimized by using Taguchi method. The turning operations were carried …
[HTML][HTML] Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
In this study, the metal matrix composite materials were produced by hot press with various
production parameters. The drilling experiments were performed on computer numerical …
production parameters. The drilling experiments were performed on computer numerical …
Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant
The tribological behaviour of powder metallurgy-processed Al 2024–5wt% SiC–x wt%
graphite (x= 0, 5, and 10) hybrid composites was investigated using a pin-on-disc …
graphite (x= 0, 5, and 10) hybrid composites was investigated using a pin-on-disc …
Review of machining metal matrix composites
A bstract Metal matrix composites (MMCs) are materials which have been widely used in the
aerospace and automobile industries since the 1980s and have been classified as hard-to …
aerospace and automobile industries since the 1980s and have been classified as hard-to …
Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites
T Rajmohan, K Palanikumar - Measurement, 2013 - Elsevier
In this study, the application of response surface methodology (RSM) and central composite
design (CCD) for modeling, optimization, and an analysis of the influences of dominant …
design (CCD) for modeling, optimization, and an analysis of the influences of dominant …
Sea Sand Abrasive Wear of Red Mud Micro Particle Reinforced Cissus quadrangularis Stem fiber/epoxy Composite
Natural fibers are growing attention in the replacement of synthetic glass fiber due to their
unique properties. The present work focuses on the wear properties of Epoxy with C issus …
unique properties. The present work focuses on the wear properties of Epoxy with C issus …
Optimization of machining parameters in drilling hybrid aluminium metal matrix composites
T Rajmohan, K Palanikumar, M Kathirvel - Transactions of Nonferrous …, 2012 - Elsevier
Taguchi method with grey relational analysis was used to optimize the machining
parameters with multiple performance characteristics in drilling hybrid metal matrix …
parameters with multiple performance characteristics in drilling hybrid metal matrix …