This critical review considers the fundamental concept, methods of obtaining, stability, and
properties of a new class of materials—high-entropy alloys and compounds. An analysis of …

Alloys with high configurational entropy fundamentally differ from traditional alloys as they
contain not one, but five or more basic elements with concentrations of 5 to 35 at.% each …

Short-range ordering and atomic segregation have been observed experimentally in high-
entropy alloys (HEAs). Understanding their impact on the melting temperature is crucial to …

В критическом обзоре рассмотрены фундаментальная концепция, методы получения,
стабильность и свойства нового класса материалов–высокоэнтропийных сплавов и …

In this paper, the hydrogen induced cracking behavior of the Co 30 Cr 10 Fe 10 Al 18 Ni 30
Mo 2 eutectic high entropy alloy was studied. The results showed that the strength and …

With the continuous progress and development in biomedicine, metallic biomedical
materials have attracted significant attention from researchers. Due to the low compatibility …

In this study, AlCoCuNiTi high entropy alloy was produced by high-energy ball-milling
(mechanical alloying) and sintering methods. The microstructural, thermal, and …

The as-cast microstructure characteristic and room temperature mechanical properties of Al
0.4 Co 0.5 V x FeNi high-entropy alloys (HEAs, where x= 0, 0.2, 0.4, and 0.6 in molar ratio …

Abstract Al-Co-Cr-Fe-Ni alloys have been modeled by computational thermodynamics
according to the CALPHAD approach using literature data and results of a few key …

According to a recent Hume-Rothery approach, the electron concentration, e/a, and the
average radius can be used to identify the domain of stability of HEAs and to estimate the …