Enhancing the photodetection property of CdSe thin films via thermal evaporation technique: role of substrate temperature
SS Kumar, S Valanarasu, KV Gunavathy… - Physica …, 2022 - iopscience.iop.org
The current work investigates the influence of the substrate temperature on the
photodetection capability of cadmium selenide (CdSe) thin films deposited through …
photodetection capability of cadmium selenide (CdSe) thin films deposited through …
Current transport mechanism in CdS thin films prepared by vacuum evaporation method at substrate temperatures below room temperature
M Tomakin, M Altunbaş, E Bacaksiz, Ş Çelik - Thin Solid Films, 2012 - Elsevier
CdS thin films were deposited by vacuum deposition method at low substrate temperatures
instead of the commonly used vacuum deposition at high substrate temperatures (TS> …
instead of the commonly used vacuum deposition at high substrate temperatures (TS> …
Effective atomic numbers and electron densities for CdSe and CdTe semiconductors
The mass attenuation coefficients for Cd, Se, Te in elemental state and semiconductor
CdSe, CdTe were measured at different energies from 9.7 to 87.3 keV by using the …
CdSe, CdTe were measured at different energies from 9.7 to 87.3 keV by using the …
Unveiling the influence of thermal treatment on physical properties of Cu doped CdSe films for photovoltaic applications
In view of cost effectiveness, the CdSe material could be urged as promising absorber to thin
film based photovoltaic devices. The properties of CdSe films could be effectively modulated …
film based photovoltaic devices. The properties of CdSe films could be effectively modulated …
The influence of substrate temperature on the morphology, optical and electrical properties of thermal-evaporated ZnTe thin films
E Bacaksiz, S Aksu, N Ozer, M Tomakin… - Applied surface science, 2009 - Elsevier
The structural, morphological, optical and electrical properties of ZnTe films deposited by
evaporation were investigated as a function of substrate temperature (at− 123 and 27° C) …
evaporation were investigated as a function of substrate temperature (at− 123 and 27° C) …
Schottky diode properties of CuInSe2 films prepared by a two-step growth technique
CuInSe2 films were synthesized by a thermal evaporation method on both glass and Mo
coated glass substrates. To obtain Al/CuInSe2/Mo Schottky diode, Al metal was evaporated …
coated glass substrates. To obtain Al/CuInSe2/Mo Schottky diode, Al metal was evaporated …
Hydrophilic CdSe thin films by low cost spray pyrolysis technique and annealing effects
T Logu, K Sankarasubramanian… - Electronic Materials …, 2015 - Springer
Cadmium selenide (CdSe) thin films were deposited on glass substrates at 200° C by
homemade chemical spray pyrolysis technique. The as-deposited films were annealed in air …
homemade chemical spray pyrolysis technique. The as-deposited films were annealed in air …
Investigation of growth temperature effects on SnSe-based photodetector performance
SnSe thin films were synthesized by thermal evaporation on glass slides at elevated growth
temperatures. The grown films were investigated in terms of structural, morphological and …
temperatures. The grown films were investigated in terms of structural, morphological and …
CdSe thin films-based photodetector doped with Cu, In and Ga atoms: a comparative work
The present work demonstrates a comparison of performance of Cu, In and Ga-doped CdSe
thin films-based photodetectors. Structural, morphological, optical and electrical …
thin films-based photodetectors. Structural, morphological, optical and electrical …
Development of photovoltaic and photodetection characteristics in CdS/P3HT devices through Al-doping
CdS thin films were deposited by chemical bath deposition onto FTO substrates with Al
concentrations of 0, 1, 3, 5 and 6%. X-ray diffraction revealed introduction of 1% Al-doping …
concentrations of 0, 1, 3, 5 and 6%. X-ray diffraction revealed introduction of 1% Al-doping …