Optimization of the cutting parameters affecting the turning of AISI 52100 bearing steel using the Box-Behnken experimental design method
In this study, we aimed to optimize the cutting parameters that affect the minimum
temperature and power consumption in the turning of AISI 52100 bearing steel. For this, the …
temperature and power consumption in the turning of AISI 52100 bearing steel. For this, the …
An MCDM approach for multi-response optimisation of machining parameters in turning of EN8 steel (AISI-1040) for sustainable manufacturing
The study aims to obtain a sustainable solution in terms of material removal rate (MRR,
cm3/min), surface roughness (Ra, μm), resultant cutting force (F, Newton), and noise level …
cm3/min), surface roughness (Ra, μm), resultant cutting force (F, Newton), and noise level …
Thermomechanical modeling of flank wear in turning
This research investigates the impact of cutting conditions and tool geometry on flank wear
during turning. A thermomechanical model was developed while considering abrasion as …
during turning. A thermomechanical model was developed while considering abrasion as …
[HTML][HTML] Multivariate modelling of AA6082-T6 drilling performance using RSM, ANN and response optimization
The AA6082-T6 was experimentally studied in the present research with respect to the
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …
Strategy and computational examination of surface grinding machine with predictive diagnostic performance system during operation
TC Chan, A Ullah, A Dutta - The International Journal of Advanced …, 2024 - Springer
Surface grinding is critical for producing precise workpiece dimensions and surface finishes,
especially for materials like cast iron and steel. Optimal grinding materials must reliably cling …
especially for materials like cast iron and steel. Optimal grinding materials must reliably cling …
Analysis of the Influence of Structural Characteristics on the Tensile Properties of Fused Filament Fabricated ABS Polymer Using Central Composite Design
This study presents an investigation of the effects of structural characteristics, such as the
layer height, infill density, top/bottom layer line directions and infill pattern, on the structural …
layer height, infill density, top/bottom layer line directions and infill pattern, on the structural …
Multivariate analysis of AISI-52100 steel machining: a combined finite element artificial intelligence approach
A Tzotzis, N Efkolidis… - … of Mechatronics and …, 2024 - inderscienceonline.com
The present study focuses on the analysis of AISI-52100 steel hard-turning with
standardised square inserts. The process is being studied in terms of the resultant cutting …
standardised square inserts. The process is being studied in terms of the resultant cutting …
RSM-based surface roughness modelling during AISI-H13 slot milling
Surface roughness is a critical parameter when considering machining cost, tool longevity
and mechanical component performance. A widely applied method for developing …
and mechanical component performance. A widely applied method for developing …
Fundamentals of 3D Finite Element Modeling in Conventional Machining
The present chapter introduces the fundamentals of Finite Element Method (FEM) applied in
standard machining processes such as turning, drilling, and milling. The most broadly used …
standard machining processes such as turning, drilling, and milling. The most broadly used …
A Comparative Study Between 2D and 3D Finite Element Methods in Machining
Abstract The Finite Element Method (FEM) is arguably one of the most valuable tools when
studying manufacturing processes. Therefore, it is widely used for the development of …
studying manufacturing processes. Therefore, it is widely used for the development of …