Laser-induced incandescence: Particulate diagnostics for combustion, atmospheric, and industrial applications
The understanding of soot formation in combustion processes and the optimization of
practical combustion systems require in situ measurement techniques that can provide …
practical combustion systems require in situ measurement techniques that can provide …
Laser-induced incandescence: recent trends and current questions
This paper provides an overview of a workshop focused on fundamental experimental and
theoretical aspects of soot measurements by laser-induced incandescence (LII). This …
theoretical aspects of soot measurements by laser-induced incandescence (LII). This …
Combustion-formed nanoparticles
A D'Anna - Proceedings of the Combustion Institute, 2009 - Elsevier
The processes by which carbonaceous nanoparticles are produced from combustion of
liquid and gaseous fuels are reviewed. The focus of the paper is on the formation and …
liquid and gaseous fuels are reviewed. The focus of the paper is on the formation and …
Study of the formation of soot and its precursors in flames using optical diagnostics
P Desgroux, X Mercier, KA Thomson - Proceedings of the Combustion …, 2013 - Elsevier
Soot particle emission from combustion processes is a significant environmental and health
problem. Optical detection is clearly the only viable choice for in situ PAH and soot …
problem. Optical detection is clearly the only viable choice for in situ PAH and soot …
Modeling laser-induced incandescence of soot: a summary and comparison of LII models
HA Michelsen, F Liu, BF Kock, H Bladh, A Boiarciuc… - Applied physics B, 2007 - Springer
We have performed a comparison of ten models that predict the temporal behavior of laser-
induced incandescence (LII) of soot. In this paper we present a summary of the models and …
induced incandescence (LII) of soot. In this paper we present a summary of the models and …
Heat conduction from a spherical nano-particle: status of modeling heat conduction in laser-induced incandescence
Laser-induced incandescence (LII) of nano-second pulsed laser heated nano-particles has
been developed into a popular technique for characterizing concentration and size of …
been developed into a popular technique for characterizing concentration and size of …
Laser-induced incandescence for non-soot nanoparticles: recent trends and current challenges
Laser-induced incandescence (LII) is a widely used combustion diagnostic for in situ
measurements of soot primary particle sizes and volume fractions in flames, exhaust gases …
measurements of soot primary particle sizes and volume fractions in flames, exhaust gases …
Influence of polydisperse distributions of both primary particle and aggregate size on soot temperature in low-fluence LII
F Liu, M Yang, FA Hill, DR Snelling, GJ Smallwood - Applied Physics B, 2006 - Springer
An improved aggregate-based low-fluence laser-induced incandescence (LII) model has
been developed. The shielding effect in heat conduction between aggregated soot particles …
been developed. The shielding effect in heat conduction between aggregated soot particles …
Two-color time-resolved LII applied to soot particle sizing in the cylinder of a Diesel engine
BF Kock, B Tribalet, C Schulz, P Roth - Combustion and Flame, 2006 - Elsevier
Laser-induced incandescence with time-resolved detection (TR-LII) at two wavelengths was
established and applied to the combustion chamber of a single-cylinder two-stroke Diesel …
established and applied to the combustion chamber of a single-cylinder two-stroke Diesel …
Laser-induced incandescence for soot diagnostics at high pressures
M Hofmann, WG Bessler, C Schulz, H Jander - Applied optics, 2003 - opg.optica.org
The influence of pressure on laser-induced incandescence (LII) is investigated
systematically in premixed, laminar, sooting ethylene/air flames at 1–15 bar with wavelength …
systematically in premixed, laminar, sooting ethylene/air flames at 1–15 bar with wavelength …