Synthesis, sintering, and effect of surface roughness on oxidation of submicron Ti2AlC ceramics
Abstract Submicron Ti2AlC MAX phase powder was synthesized by molten salt shielded
synthesis (MS3) using a Ti: Al: C molar ratio of 2: 1: 0.9 at a process temperature of 1000° C …
synthesis (MS3) using a Ti: Al: C molar ratio of 2: 1: 0.9 at a process temperature of 1000° C …
Role of graphite on microstructural evolution and mechanical properties of ternary TiAl alloy prepared by arc melting method
H Fang, R Chen, Y Yang, Y Su, H Ding, J Guo, H Fu - Materials & Design, 2018 - Elsevier
Abstract Ternary Ti-30.7 wt% Al-xC alloys were prepared with different carbon content (x=
0.2, 0.4, 0.8, 1.2, 1.6, and 2.0 wt%) by vacuum arc melting in order to improve the strength …
0.2, 0.4, 0.8, 1.2, 1.6, and 2.0 wt%) by vacuum arc melting in order to improve the strength …
Microstructural evolution and wear mechanism of Ti3AlC2–Ti2AlC dual MAX phase composite consolidated by spark plasma sintering (SPS)
In this work, we report the synthesis, deformation and tribological behaviour of a novel Ti 3
AlC 2–Ti 2 AlC MAX phase composite metallo-ceramic. The dual MAX phase composite was …
AlC 2–Ti 2 AlC MAX phase composite metallo-ceramic. The dual MAX phase composite was …
The influence of micro-nano Ti2AlC on the hot deformation behavior of TiAl alloys
Y Wang, T Ma, L Li, C Liu, Y Zhang, L Zhou - Intermetallics, 2022 - Elsevier
To strengthen TiAl alloys, micro-nano Ti 2 AlC precipitates were fabricated in situ by spark
plasma sintering using Ti–48Al–2Nb–2Cr pre-alloyed powder and multilayer graphene …
plasma sintering using Ti–48Al–2Nb–2Cr pre-alloyed powder and multilayer graphene …
Carbon fibers coated with graphene reinforced TiAl alloy composite with high strength and toughness
S Cui, C Cui, J Xie, S Liu, J Shi - Scientific Reports, 2018 - nature.com
To meet the more rigorous requirement in aerospace industry, recent studies on
strengthening and toughening TiAl alloys mostly focus on high Nb addition, which inevitably …
strengthening and toughening TiAl alloys mostly focus on high Nb addition, which inevitably …
Effect of spark plasma sintering temperature on the microstructure and mechanical properties of a Ti2AlC/TiAl composite
F Yang, FT Kong, YY Chen, SL Xiao - Journal of alloys and compounds, 2010 - Elsevier
The effect of spark plasma sintering (SPS) temperature on the microstructure and
mechanical properties of a bulk ultrafine structured Ti2AlC/TiAl composite prepared by SPS …
mechanical properties of a bulk ultrafine structured Ti2AlC/TiAl composite prepared by SPS …
Microstructure and mechanical properties of in situ TiAl/Ti2AlC composites prepared by reactive hot pressing
C Yang, F Wang, T Ai, J Zhu - Ceramics International, 2014 - Elsevier
Abstract TiAl/Ti 2 AlC composites with a broad range of composition are successfully
fabricated utilizing in-situ reactive hot pressing method with Ti, Al and TiC powders as …
fabricated utilizing in-situ reactive hot pressing method with Ti, Al and TiC powders as …
Microstructural and mechanical properties of dual Ti3AlC2–Ti2AlC reinforced TiAl composites fabricated by reaction hot pressing
T Ai, F Wang, X Feng, M Ruan - Ceramics International, 2014 - Elsevier
A new dual Ti 3 AlC 2 single bondTi 2 AlC/TiAl composite was in situ synthesized by hot-
pressing sintering process at 900° C for 2 h using Ti, Al, and Ti 3 AlC 2 powders as the initial …
pressing sintering process at 900° C for 2 h using Ti, Al, and Ti 3 AlC 2 powders as the initial …
Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction
S Shu, F Qiu, S Lü, S Jin, Q Jiang - Materials Science and Engineering: A, 2012 - Elsevier
The phase transitions in the Ti–Al and the Ti–Al–C systems are investigated by the
differential thermal analysis (DTA) and X-ray diffraction (XRD). The results reveal that the …
differential thermal analysis (DTA) and X-ray diffraction (XRD). The results reveal that the …
Microstructure and Mechanical Properties of Spark Plasma Sintered Nanocrystalline TiAl-xB Composites (0.0 <x<1.5 at.%) Containing Carbon Nanotubes
A Mohammadnejad, A Bahrami… - Journal of Materials …, 2021 - Springer
This paper investigates the effects of minor additions of carbon nanotubes (CNTs) and boron
on the structure and mechanical properties of nanocrystalline TiAl intermetallic compound …
on the structure and mechanical properties of nanocrystalline TiAl intermetallic compound …