The plastic response of a high-entropy alloy is explored by means of simulated
nanoindentation tests. We compare nanoindentation into the Cantor alloy–an equi-atomic …

The present study explores the deformation behavior of fine-grained 316L stainless steel
through in-situ tensile transmission electron microscopy (TEM), with a focus on both …

Twinning-induced plasticity (TWIP) steels have become important materials in industry
owing to the good combination of strength and ductility and high strain hardening rate. The …

Short-range ordering (SRO) in single-phase face-centered cubic solid solution alloys has
been linked to changes in mechanical behavior that are correlated with pronounced …

Abstract The Frank-Read (FR) source is a well-known intragranular dislocation source that
plays an important role in size-dependent dislocation multiplication in metallic crystals. In …

Until now, the nature of the competitive and cooperative correlation between solid solution
strengthening and precipitate hardening is still uncovered, and then brings great challenges …

The elastic-to-plastic transition during the deformation of a dislocation-free nanoscale
volume is accompanied by displacement bursts associated with dislocation nucleation. The …

Plastic deformation behavior of Inconel 740H superalloy during uniaxial tension at high
temperature was investigated. The self-developed in-situ high-temperature tensile stage …

Many elementary deformation processes in metals involve the motion of dislocations. The
planes of glide and specific processes dislocations prefer depend heavily on their atomic …

Although cross-slip strongly affects the deformation of polycrystalline materials, the
phenomenon is rarely studied in twinned face centered cubic (FCC) metals. Here we …