Process induced defects in liquid molding processes of composites
Abstract Liquid Composite Molding (LCM) processes are cost efficient manufacturing
alternatives to traditional autoclave technology for producing near-net shape structural …
alternatives to traditional autoclave technology for producing near-net shape structural …
Three-dimensional features of void morphology in resin transfer molded composites
Detailed analyses of shape, size, and spatial variations of void morphology are presented
for a disk-shaped, resin transfer molded (RTM), E-glass/epoxy composite. The disk is …
for a disk-shaped, resin transfer molded (RTM), E-glass/epoxy composite. The disk is …
Measurement of void content and distribution in composite materials through digital microscopy
S Paciornik, JRM d'Almeida - Journal of Composite Materials, 2009 - journals.sagepub.com
The use of digital optical microscopy techniques to measure the volume fraction and spatial
distribution of voids in composite materials manufactured by filament winding is presented …
distribution of voids in composite materials manufactured by filament winding is presented …
Properties of composite cylinders fabricated by bladder assisted composite manufacturing
JP Anderson, MC Altan - Journal of …, 2012 - asmedigitalcollection.asme.org
An innovative manufacturing method, bladder assisted composite manufacturing (BACM), to
fabricate geometrically complex, hollow parts made of polymeric composite materials is …
fabricate geometrically complex, hollow parts made of polymeric composite materials is …
Effect of nanoclay content on void morphology in resin transfer molded composites
Effects of nanoclay content on morphology and spatial distribution of voids in resin transfer
molded nanoclay/E-glass/epoxy composite disks are investigated. Closite® 25A nanoclay …
molded nanoclay/E-glass/epoxy composite disks are investigated. Closite® 25A nanoclay …
[HTML][HTML] On the void reduction mechanisms in vibration assisted consolidation of fibre reinforced polymer composites
J Muric-Nesic, P Compston, ZH Stachurski - Composites Part A: Applied …, 2011 - Elsevier
Vibration-and vacuum-assisted curing experiments of laminate composites were carried out
using a method involving a flat curing chamber and heat transfer fluid. The laminates were …
using a method involving a flat curing chamber and heat transfer fluid. The laminates were …
Process induced defects in resin transfer molded composites
Resin transfer molding (RTM) is an attractive, versatile and cost-effective alternative to
autoclave processing for manufacturing geometrically complex, structural polymer matrix …
autoclave processing for manufacturing geometrically complex, structural polymer matrix …
Characterization of the void content and laminate quality of fiber‐reinforced plastic composites manufactured using the resin spray and compaction method
Void fraction and fiber volume fraction (FVF) are among the most important parameters
determining the quality of fiber‐reinforced plastic products. Most of the voids in liquid …
determining the quality of fiber‐reinforced plastic products. Most of the voids in liquid …
Digital microscopy and image analysis applied to composite materials characterization
S Paciornik, J d'Almeida - Matéria (Rio de Janeiro), 2010 - SciELO Brasil
Digital Microscopy was employed to characterize the microstructure of fiber-reinforced
composite tubes manufactured by filament winding. Optical Microscopy was used for void …
composite tubes manufactured by filament winding. Optical Microscopy was used for void …
Effect of fiber content on void morphology in resin transfer molded e-glass/epoxy composites
Effect of fiber volume fraction on occurrence, morphology, and spatial distribution of
microvoids in resin transfer molded E-glass/epoxy composites is investigated. Three disk …
microvoids in resin transfer molded E-glass/epoxy composites is investigated. Three disk …