Deformation twinning is profusely activated in the Mg alloys due to lower critical resolved
shear stress (CRSS) compared to the non-basal slip systems (prismatic and pyramidal< c+ …

Abstract Introducing {10 1¯ 2}< 10 1¯ 1> extension twin and their variants in magnesium
alloys is one of the cost-effective practical approaches for re-assigning the crystallographic …

The effects of Sn content on strain hardening behavior of as-extruded Mg-xSn (x= 1.3, 2.4,
3.6 and 4.7 wt%) binary alloys were investigated by uniaxial tensile tests at room …

The strain hardening is an effective mode of enhancing mechanical properties in alloys. In
this work, the strain hardening behaviors of Mg-xY (x= 1, 2, and 3 wt%) after extrusion …

In this work, the effect of Gd on the microstructure evolution and mechanical properties of Mg–
4Zn–0.6 Ca–xGd (x= 0, 0.3, 0.6 and 1, wt%) alloys were investigated systematically. The …

By combining finite element analysis, compressive tests, reverse tensile tests, in-situ
electron-backscattering diffraction, and high-resolution transmission electron microscopy …

We combine pre-compressive test, reverse tensile test, re-compressive test, in-situ electron
back-scattered diffraction, and high-resolution transmission electron microscopy to …

In order to improve the stretch formability of AZ31 magnesium alloy thin sheet with thickness
of 1 mm, a multidirectional pre-compressive deformation along rolling (RD)-transverse …

To investigate the interrelation of dynamic recrystallization and detwinning behaviors,
especially during the inchoate deformation stage at elevated temperatures, a commercial …

Static annealing process of 423 K for 2.5 h is adequate to segregate alloying elements at {10
1¯ 2} twin boundaries in various Mg binary alloys. These segregated twin boundaries play a …