The effect of ASE reinjection configuration through FBGs on the gain and noise figure performance of L-Band EDFA
In this study, we present the gain and noise figure performance improvement in L-band
erbium-doped fiber amplifier (L-EDFA) provided by amplified spontaneous emission (ASE) …
erbium-doped fiber amplifier (L-EDFA) provided by amplified spontaneous emission (ASE) …
The design and implementation of a software based gain control for EDFAs used in long-haul optical networks
The optical gain spectra of erbium-doped fiber amplifiers (EDFAs) have a nonlinear structure
in the C-band region. Therefore, when the optical amplifier chain is used, in other words …
in the C-band region. Therefore, when the optical amplifier chain is used, in other words …
An Adaptive Local Joint-Weighted Method for Continuous Stripping Intensity Correction of Airborne Bathymetric LiDAR
X Ji, Z Dong, Z Wei, M Wang, W Xu… - IEEE Transactions on …, 2024 - ieeexplore.ieee.org
Alongside geometric information accepted widely, airborne laser bathymetry (ALB) typically
records the radiometric properties of sensed targets and assists with strip registration …
records the radiometric properties of sensed targets and assists with strip registration …
Gain and noise figure analysis of erbium doped fiber amplifier based on double pass configuration using forward pumping
In this paper, gain and noise figure of Erbium Doped Fiber Amplifier (EDFA) is analyzed
based on double pass with Wave Selective Coupler (WSC). The main contribution in this …
based on double pass with Wave Selective Coupler (WSC). The main contribution in this …
[PDF][PDF] Intelligent modelling of alpha (α) parameter; comparison of ANN and ANFIS cases
In the last decade, intelligent models [1-33] are started to use for system design and
simulation in addition to the developed theoretical models [34-58] in semiconductor lasers …
simulation in addition to the developed theoretical models [34-58] in semiconductor lasers …
Adaptive Neuro-Fuzzy Based Gain Controller for Erbium-Doped Fiber Amplifiers.
Erbium-doped fiber amplifiers (EDFA) must have a flat gain profile which is a very important
parameter such as wavelength division multiplexing (WDM) and dense WDM (DWDM) …
parameter such as wavelength division multiplexing (WDM) and dense WDM (DWDM) …
A complete CAD model for type-I quantum cascade lasers with the use of artificial bee colony algorithm
In this study, a simple and a single complete GAD model is obtained for type I quantum
cascade laser based on characteristic quantities (optical gain, refractive index change …
cascade laser based on characteristic quantities (optical gain, refractive index change …
Design and implementation of fuzzy logic based automatic gain controller for EDFAs
In this study, the design and implementation of a fuzzy logic (FL) based automatic gain
controller card (AGC) is performed in order to control the pump laser current with respect to …
controller card (AGC) is performed in order to control the pump laser current with respect to …
[PDF][PDF] The comparison of the gain flattening techniques EDFA configurations in the C/L band
M Yucel, G Yenilmez - Journal of Optoelectronics and Advanced …, 2015 - researchgate.net
Nowadays, EDFAs and WDM systems are the solution in the ultra-long haul fibre optical
communication systems. EDFAs are used in S (short) band, C band and L band in …
communication systems. EDFAs are used in S (short) band, C band and L band in …
Optical gain modelling in type I and type II quantum cascade lasers by using adaptive neuro-fuzzy inference system
In this study, one of the important characteristic of type I and type II Quantum Cascade
Lasers (QCLs) that is optical gain which is a function of injection current and wavelength is …
Lasers (QCLs) that is optical gain which is a function of injection current and wavelength is …