In the framework of the Cost Action CERTBOND (Reliable roadmap for certification of
bonded primary structures), a wide group of researchers from 27 European Countries have …

This paper provides a comprehensive review of literature, mostly of the last 10–15 years, on
modeling of machining of composite materials with a focus on the process of turning. The …

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive
Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add …

In this work, a formulation is developed within the phase field method for modeling
interactions between interfacial damage and bulk brittle cracking in complex microstructures …

Low temperature cracking is a major distress form of asphalt pavement. In this study, I–II
mixed mode fracture test was conducted using cohesive zone modeling technique under …

The use of composite materials in several sectors, such as aeronautics and automotive, has
been gaining distinction in recent years. However, due to their high costs, as well as unique …

The analysis of adhesively bonded joints started in 1938 with the closed-form model of
Volkersen. The equilibrium equation of a single lap joint led to a simple governing …

As a low-cost high-performance method for concrete structural reinforcement and repair, the
external bonding (EB) of fiber-reinforced polymer (FRP) laminates has gradually become …

The influence of the shape of the interface law on the analysis of debonding problems via
cohesive-zone models is addressed. Four different laws have been considered whose …

A reliable numerical damage model has been developed for adhesively bonded joints under
fatigue loading that is only dependant on the adhesive system and not on joint configuration …