Centrifuge tests were conducted to reveal the lateral bearing behaviors of double steel sheet
pile structures (DSSPSs). The model ground was made of Kaolin clay in a rectangular model …

Static load tests on foundation piles are generally carried out in order to determine load–the
displacement characteristic of the pile head. For standard (basic) engineering practices this …

Piled raft foundations have become a prominent foundation system in recent years as they
combine bearing capacities of piles and raft. For this reason, comprehensive analytical …

Screw displacement (SD) pile and continuous flight auger (CFA) pile are two similar deep
foundation technologies, and new developed SD piles are used for the first time in Anhui …

The measurement of pile axial load is of great significance to determining pile foundation
design parameters such as skin friction and end bearing capacity and analyzing load …

For some time (since 8-10 years in Poland) a special static load tests on instrumented piles
are carried out. Such studies are usually of a scientific nature and provide detailed …

This paper introduces a method based on a static load test which is aimed to verify the
mechanism of the piles soil–skin interaction. The authors base their analysis on detailed …

Single-timber piles were used as the pile foundation of small-scale buildings in the soft
ground of the Saga lowland, Japan, where differential settlement occurred. The tip of the …

Load-settlement characteristic (Qs) of an axially loaded pile can be empirically determined
from a static pile load test or on the basis of calculations using, eg transfer functions or …

Представлены новые методы расчета несущей способности и надежности висячей
сваи при выдергивающей нагрузке. Предложен новый подход к возникновению и …