Microstructures and mechanical properties of wear-resistant titanium oxide coatings deposited on Ti-6Al-4V alloy using laser cladding
In this work, a freeze-dried TiO 2 nano-sized powder was used as the coating material and
single tracks of TiO x coating were cladded on Ti-6Al-4V substrates using a diode laser. The …
single tracks of TiO x coating were cladded on Ti-6Al-4V substrates using a diode laser. The …
Effects of laser power on immersion corrosion and electrochemical corrosion performances of laser thermal sprayed amorphous AlFeSi coatings
W Zhao, D Kong - Applied Surface Science, 2019 - Elsevier
Amorphous AlFeSi coatings were fabricated on S355 structural steel using a laser thermal
spraying (LTS). The surface and cross–section morphologies, chemical composition, phases …
spraying (LTS). The surface and cross–section morphologies, chemical composition, phases …
Laser deposition of compositionally graded titanium oxide on Ti6Al4V alloy
In this study, a laser cladding process was developed to deposit dense and well-adhered
titanium single tracks on the surface of Ti6Al4V alloy with a compositional and …
titanium single tracks on the surface of Ti6Al4V alloy with a compositional and …
Microstructure, dry sliding friction performances and wear mechanism of laser cladded WC–10Co4Cr coating with different Al2O3 mass fractions
J Shi, Y Ge, D Kong - Surface and Coatings Technology, 2021 - Elsevier
To enhance the hardness and wear resistance of cold work mold, Al 2 O 3 reinforced WC–
10Co4Cr coatings were fabricated on Cr12MoV steel using a laser cladding (LC). The …
10Co4Cr coatings were fabricated on Cr12MoV steel using a laser cladding (LC). The …
General corrosion behavior and mechanism of ferritic/martensitic steel with and without TaWVCr coating in static oxygen-saturated lead bismuth eutectic at 550° C
S Li, L Sun, S Cheng, A Gong, W Yang… - Surface and Coatings …, 2024 - Elsevier
Here in present work, the ferritic/martensitic (F/M) steel HT9 and refractory TaWVCr high
entropy alloy coated HT9 were tested in a static oxygen-saturated lead bismuth eutectic …
entropy alloy coated HT9 were tested in a static oxygen-saturated lead bismuth eutectic …
Microstructure and properties of an AZ61 alloy after extrusion with a forward-backward oscillating die without preheating of the initial billet
A Dobkowska, A Zielińska, I Paulin, Č Donik… - Journal of Alloys and …, 2023 - Elsevier
We have investigated the microstructure, mechanical and corrosion properties of an AZ61
alloy that was extruded using a newly developed technique with an oscillating die (KoBo) …
alloy that was extruded using a newly developed technique with an oscillating die (KoBo) …
Deformation and fracture behaviours of a YAG single crystal characterized using nanoindentation method
In this work, nanoindentation tests were carried out to understand the deformation and
fracture behaviours of yttrium aluminium garnet (YAG) single crystal. The elastic modulus …
fracture behaviours of yttrium aluminium garnet (YAG) single crystal. The elastic modulus …
Inducing stable interfacial delamination in a multilayer system by four-point bending of microbridges
The ability to produce stable delamination of thin film multilayer interfaces is a powerful tool
for studying the interfacial adhesion within microsystems. In this study, a technique involving …
for studying the interfacial adhesion within microsystems. In this study, a technique involving …
Effect of TiCr Mass Fraction on Microstructure and Electrochemical Performance of Laser Cladded Ni-30% WC Coatings on S136 Steel
G Yuan, X Yongfu, Z Chunyuan, D Lingjie… - Journal of Materials …, 2023 - Springer
Ni-30% WC coatings with the TiCr mass fractions of 3%, 6% and 9% were prepared on S136
steel by laser cladding, and the effects of TiCr mass fraction on the microstructure and …
steel by laser cladding, and the effects of TiCr mass fraction on the microstructure and …
Effect of La2O3 Addition on Microstructure and Tribological Performance of Laser Cladded Ni-WC Coating on S136 Steel
X Yongfu, K Dejun - Transactions of the Indian Institute of Metals, 2022 - Springer
Abstract La2O3 reinforced Ni-WC coatings were prepared on S136 steel by laser cladding
technique. The microstructure and phase of obtained coatings were analyzed using an ultra …
technique. The microstructure and phase of obtained coatings were analyzed using an ultra …