[HTML][HTML] Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Aluminium hybrid composites are a new generation of metal matrix composites that have the
potentials of satisfying the recent demands of advanced engineering applications. These …
potentials of satisfying the recent demands of advanced engineering applications. These …
Radiation damage in nanostructured materials
Materials subjected to high dose irradiation by energetic particles often experience severe
damage in the form of drastic increase of defect density, and significant degradation of their …
damage in the form of drastic increase of defect density, and significant degradation of their …
Spark plasma sintering of metals and metal matrix nanocomposites: a review
Metal matrix nanocomposites (MMNCs) are those metal matrix composites where the
reinforcement is of nanometer dimensions, typically less than 100 nm in size. Also, it is …
reinforcement is of nanometer dimensions, typically less than 100 nm in size. Also, it is …
Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5% Cu-xTiB2 composite
The objective of this study is to understand the suitability of mixed salt route using stir casting
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
Manufacture of nano-sized particle-reinforced metal matrix composites: a review
D Zhou, F Qiu, H Wang, Q Jiang - Acta Metallurgica Sinica (English Letters …, 2014 - Springer
Compared to the micro-sized particle-reinforced metal matrix composites, the nano-sized
particle-reinforced metal matrix composites possess superior strength, ductility, and wear …
particle-reinforced metal matrix composites possess superior strength, ductility, and wear …
An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying
D Jeyasimman, S Sivasankaran, K Sivaprasad… - Materials & Design, 2014 - Elsevier
Abstract Nanostructured Al 6061–x wt.% TiC (x= 0.5, 1.0, 1.5 and 2.0 wt.%) composites were
synthesised by mechanical alloying with a milling time of 30 h. The milled powders were …
synthesised by mechanical alloying with a milling time of 30 h. The milled powders were …
Carbon nanotube reinforced aluminum matrix composites produced by spark plasma sintering
P Cavaliere, B Sadeghi, A Shabani - Journal of Materials Science, 2017 - Springer
Spark plasma sintering (SPS) has been recognized, in the recent past, as a very useful
method to produce metal matrix composites with enhanced mechanical and wear properties …
method to produce metal matrix composites with enhanced mechanical and wear properties …
Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying
MA Taha, MF Zawrah - Ceramics International, 2017 - Elsevier
To improve the mechanical properties of sintered Cu-matrix composites, nano ZrO 2 was
added up to 12 wt-% and the mechanical alloying technique was used for preparation. After …
added up to 12 wt-% and the mechanical alloying technique was used for preparation. After …
Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites
Nanostructured Al 5083-based composites with nano-TiB 2 reinforcement particles were
fabricated via cryomilling and spark plasma sintering (SPS). TEM observation revealed that …
fabricated via cryomilling and spark plasma sintering (SPS). TEM observation revealed that …
Development of a 3D-printed dosing platform to aid in zolpidem withdrawal therapy
The long-term use of benzodiazepine receptor agonists (BZRAs) is associated with multiple
side effects, such as increased sedation, hangover or an elevated risk of dependency and …
side effects, such as increased sedation, hangover or an elevated risk of dependency and …