Reducing mercury emissions from coal-fired power plants in India: possibilities and challenges
A Joy, A Qureshi - Ambio, 2023 - Springer
Coal combustion is the largest source of power in India at the moment. This combustion also
emits trace amounts of hazardous substances such as mercury. Mercury is a global pollutant …
emits trace amounts of hazardous substances such as mercury. Mercury is a global pollutant …
[HTML][HTML] A review on the processing of various coating materials using surface modification techniques for high-temperature solid particle erosion applications
In 21st century with the advent of industrial revolution 4.0, the future manufacturing and
power generation industries will scale new heights. The focus of researchers and engineers …
power generation industries will scale new heights. The focus of researchers and engineers …
Studies on solid particle erosion behaviour of D-Gun sprayed WC-Co, Stellite 6 and Stellite 21 coatings on SAE213-T12 boiler steel at 400° C temperature
Erosion wear of boiler tubes occurs from room temperature to high temperature and is
accelerated by oxidation and hot corrosion above 400° C temperature. The demand for hard …
accelerated by oxidation and hot corrosion above 400° C temperature. The demand for hard …
[HTML][HTML] Tribological properties of fly ash blended polymer composites
In this study, it was studied that the abrasion resistance and characteristics of polymer
composites with fly ash (FA). The epoxy based polymer composites are produced with resin …
composites with fly ash (FA). The epoxy based polymer composites are produced with resin …
Development of predictive model for fly-ash erosion phenomena in coal-burning boilers
R Nagarajan, B Ambedkar, S Gowrisankar… - Wear, 2009 - Elsevier
The effects of ash particle physical properties and transport dynamics on the erosive wear of
three different grades of low alloy steel, using three different power-station ash types, were …
three different grades of low alloy steel, using three different power-station ash types, were …
Interaction mechanisms and high-temperature erosion-oxidation performance of Cr3C2-NiCrCoMo/nano-TiC coatings
J Du, X Qi, H Lu, Y Hua, Y Li, F Li - Ceramics International, 2024 - Elsevier
To improve the erosion resistance of typical Cr 3 C 2-NiCr coatings at high temperature, a
novel Cr 3 C 2-NiCrCoMo/nano-TiC (NCT) coating was developed and deposited by the …
novel Cr 3 C 2-NiCrCoMo/nano-TiC (NCT) coating was developed and deposited by the …
Experimental investigation on erosion performance and wear factors of custom 450 steel as the first row blade material of an axial compressor
A first-stage blade of an axial compressor was fractured after 30,895 hours of operation due
to existence of pits and micro-cracks, which were created by erosion and poor corrosion …
to existence of pits and micro-cracks, which were created by erosion and poor corrosion …
Erosion performance of detonation gun deposited WC–12Co, Stellite 6 and Stellite 21 coatings on SAE213-T12 steel
Thermal spray coatings are used to improve the erosion resistance of boilers and turbine
components for power plants and other industries. In this work, detonation gun spraying …
components for power plants and other industries. In this work, detonation gun spraying …
Comparative erosion performance of HVOF and LVOF sprayed NiCrSiBCFe-WC-Co coating
Thermal spray coatings enhance one or more surface properties of engineering
components. In this work, NiCrSiBCFe-WC-Co composite coating powder is deposited over …
components. In this work, NiCrSiBCFe-WC-Co composite coating powder is deposited over …
Erosion Studies of D-Gun-Sprayed WC-12%Co, Cr3C2-25%NiCr and Al2O3-13%TiO2 Coatings on ASTM A36 Steel
Solid particle erosion studies were conducted in simulated coal-fired boiler environment in
order to compare the erosion behavior of three different types of detonation gun (D-Gun) …
order to compare the erosion behavior of three different types of detonation gun (D-Gun) …