Abstract O 3/UV/TiO 2 was used to effectively decompose humic acids (HAs) in drinking
water. To obtain a large specific surface area and low band gap energy, Al and Fe co-doped …

Fe-doped titanium dioxide (TiO2) nanotubes were prepared using sol–gel followed by
hydrothermal methods and characterized using various methods. The sonocatalytic activity …

Ternary carbide in metal matrix composites constitute a big challenge in the industry, and in
this regard their surface treatment is one of the most important issues. Ternary carbide (Cu x …

CaAlSiN3: Eu2+ is a very promising red phosphor for high color rendering white light-
emitting diodes (wLEDs), but a large part of its emission covers wavelengths longer than …

Nitrogen-doped TiO2 nanotube arrays (N-TNAs) were successfully fabricated by a simple
thermal annealing process in ambient N2 gas at 450° C for 3 h. TNAs with modified …

Copper oxide (CuO) loaded titanium dioxide (TiO 2) nanotube photocatalyst was
synthesised using the facile hydrothermal method. The synthesised photocatalyst were …

TiN_xO_y films with controllable optical properties have been fabricated by reactive mid-
frequency magnetron sputtering from titanium nitride target. The optical and electrical …

For physical surface modification of a complex workpiece, the incoming particles are difficult
to arrive at the inclined surface of the complex workpiece due to self-shadowing effect. This …

The effects of ion-doping on TiO 2 nanotubes were investigated to obtain the optimal catalyst
for the effective decomposition of Rhodamine B (RB) through UV photocatalytic oxidation …

The nanostructured titanium oxynitride (TiO x N y) thin film was fabricated by a reactive direct
current magnetron sputtering method at room temperature. The mechanism of TiO x N y thin …