A series of AlxCo1. 5CrFeNi1. 5Tiy high-entropy alloys with different Al and Ti contents were
designed, and their phase and microstructure were investigated. The adhesive wear …

The microstructure, hot hardness and oxidation behavior of Al 0.6 CoCrFeNi high-entropy
alloy were investigated. Moreover, the effect of the temperature on the tribological properties …

This study developed a series of Al x (TiZrHfNb) 100-x (x= 0, 3, 5, 7, 12 at.%) refractory high-
entropy alloys (RHEAs) with an aim to improve the poor oxidation and wear resistance at …

A series of TiZrV 0.5 Nb 0.5 Al x refractory high entropy alloys were prepared by arc-metling,
aiming to solve the problems of high density, poor oxidation and wear resistance of …

As a typical wear-resistant material, TiC particle-reinforced AlCoCrFeNi composite coatings
have great advantages. In this work, the Mo was added to AlCoCrFeNi-TiC coatings to …

Plasma carburizing has emerged as a potent technique for improving the wear resistance of
stainless steels, and sustaining or improving corrosion resistance through a suitable choice …

The role of the ceramic particles in the wear behaviour of particulate composites was
investigated by minimizing the influence of the often intricate metallic matrix (high speed …

The high temperature wear performance of Inconel 617 and Stellite 6 alloys was
investigated and compared with that of the X32CrMoV33 hot work tool steel. The wear …

Cold spray is a relatively new method used to deposit WC reinforced composite coatings,
where its low temperature is advantageous for avoiding oxidation and carbide …

Tensile residual stress in the laser-deposited M4 fabricated by direct energy deposition
(DED) may reduce the fatigue performance and tool life. Ultrasonic nanocrystal surface …