Titanium (Ti) alloys are widely used in high-tech fields like aerospace and biomedical
engineering. Laser additive manufacturing (LAM), as an innovative technology, is the key …

A bidirectional powder deposition strategy was employed to additively manufacture Ti–15Mo
wt% using laser metal deposition. The as-built alloy was subsequently subjected to post …

Abstract In this paper, Ti-5Al-2.5 Sn-xMo (TASxM, x= 0, 5, 10, 15 wt%) alloys were designed
and prepared. Phase compositon and microstructure analysis results indicate that the …

A bidirectional powder deposition strategy was employed to additively manufacture Ti–15Mo
wt% using laser metal deposition. The as-built alloy was subsequently subject to post …

To the best of our knowledge, this is the first report demonstrating grain refinement to 4 μm
via a mass-production method for the Ti–15Mo alloy. Grain sizes ranging from 4 to 38 μm …

The study aimed to analyze how milling time (2 h-24 h) affects structural, mechanical, and
tribological properties of Ti-15Mo alloys, these last has evaluated by using XRD, SEM, and a …

In this study, a new refractory high entropy alloy (RHEA) Al-Nb-Ti-V-Zr is fabricated by laser
direct energy deposition (LDED), and an investigation is conducted to explore the hot …

This study on laser powder bed fusion (LPBF) in-situ alloying of Fe-25Cr-15Co (wt.%)
permanent magnetic alloy addresses the anisotropy in texture, microstructure, and …

This review summarizes and critically discusses the current knowledge on the
microstructures and tensile properties of metastable β Ti alloys fabricated by selective laser …

Ti6Al4V alloy finds extensive use in aerospace, automotive, and other industries. However,
its surface has low wear resistance, limiting its practical applications. This study developed a …