Determination of photovoltaic parameters of CIGS hetero junction solar cells produced by PLD technique, using SCAPS simulation program

SY Gezgin, A Houimi, Y Gündoğdu, B Mercimek… - Vacuum, 2021 - Elsevier
In this study, CIGS ultrathin films of 52 nm, 89 nm, 183 nm and 244 nm thicknesses were
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …

Hierarchically structured sub-bands in chalcopyrite thin-film solar cell devices

K Vijayan, L Thirumalaisamy… - New Journal of …, 2023 - pubs.rsc.org
Framing effective mitigation steps to resolve the energy crisis directs to the research gap of
existing solar cell technologies. The study utilizes the inherent physiochemical properties of …

An improvement on the conversion efficiency of Si/CZTS solar cells by LSPR effect of embedded plasmonic Au nanoparticles

SY Gezgi̇n, HŞ Kılıç - Optical Materials, 2020 - Elsevier
Abstract In this work, Au/Si/CZTS/Ag and Au/Si/plasmonic-CZTS/Ag solar cells have been
produced using PLD technique. These CZTS solar cells have been produced based on p …

Facile single step synthesis of Cu2ZnSnS4 thin films by sputtering from a single target and their electrical characterization

K Pandey, BC Mohanty - Journal of Alloys and Compounds, 2022 - Elsevier
Facile deposition of ternary semiconducting Cu 2 ZnSnS 4 (CZTS) thin films has been a
challenge due to a very narrow range of single phase stability in the Cu-Zn-Sn-S system …

The effect of CZTS ultrathin film thickness on the electrical characteristic of CZTS/Si heterojunction solar cells in the darkness and under the illumination conditions

SY Gezgin, A Houimi, B Mercimek, HŞ Kiliç - Silicon, 2021 - Springer
In this study, Ag/CZTS/Si/Al heterojunction solar cells were produced depending on some
parameters of CZTS ultrathin active film layers grown on a n-Si wafer by PLD technique …

Modelling and investigation of the electrical properties of CIGS/n-Si heterojunction solar cells

SY Gezgin - Optical Materials, 2022 - Elsevier
Abstract Ag/CIGS/n-Si/Al solar cells which were formed basing ultrathin film thickness by
Pulse Laser Deposition (PLD) method, to be used as a sub-solar cell in tandem solar cells …

Optimization of sulphurization temperature for the production of single-phase CZTS kesterite layers synthesized by electrodeposition

R Boudaira, O Meglali, A Bouraiou, N Attaf… - Surface …, 2020 - Taylor & Francis
Cu2ZnSnS4 films were grown onto FTO/glass substrate by electrodeposition. The influence
of sulphurization temperature on CZTS properties was examined using XRD, Raman …

The effect of Ag and Au contacts on the efficiency of CZTS/n-Si solar cell: the confirmation of experimental and theoretical results by SCAPS simulation

SY Gezgin, HŞ Kiliç - Brazilian Journal of Physics, 2022 - Springer
In this work, Ag/CZTS/n-Si/Ag and Ag/CZTS/n-Si/Au heterojunction solar cells have been
produced using PLD technique. The crystal size, microstrain, dislocation density and lattice …

Influencing mechanism of post-sulfurization with sulfur flakes on phase evolution and Schottky diode characteristic of Cu2ZnSnS4 thin films sputter deposited from a …

K Pandey, BC Mohanty - Solar Energy, 2021 - Elsevier
While single target sputter deposition appears very attractive to prepare kesterite Cu 2
ZnSnS 4 (CZTS) thin films for photovoltaic applications, the growth of secondary phases …

Nonlinear optical properties of Cu2ZnSnS4 nanocrystal thin films and its constituents thin films

HŞ Kılıç, Y Gündoğdu, S Kılıç, S Yiğit Gezgin - Optical and Quantum …, 2021 - Springer
Abstract In this study, Cu 2 ZnSnS 4 nanocrystal and its constituents' copper, zinc and tin
were grown separately by pulsed laser deposition technique as thin films, and their linear …