[HTML][HTML] Formulation of corrosion rate of magnesium alloys using microstructural parameters
A Bahmani, S Arthanari, KS Shin - Journal of Magnesium and Alloys, 2020 - Elsevier
Up to the date of writing this article, a quantitative analysis between corrosion rate and
combined microstructural parameters including composition, grain size, and precipitations …
combined microstructural parameters including composition, grain size, and precipitations …
Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41
The influence of pH and chloride ion concentration on the corrosion behaviour of ZE41 was
studied using immersion tests and electrochemical measurements. A shorter incubation …
studied using immersion tests and electrochemical measurements. A shorter incubation …
The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy
The quest for ever, higher performance in structural applications has resulted in the outgoing
development of new or improved materials with novel crystallographic textures …
development of new or improved materials with novel crystallographic textures …
Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg (OH) 2 of as-cast and solution heat-treated binary Mg–X alloys: X= Mn, Sn, Ca, Zn, Al …
Corrosion of binary Mg–X alloys (as-cast and solution heat-treated) was characterised by
immersion tests in 3.5% NaCl solution saturated with Mg (OH) 2, and by salt spray. Alloys …
immersion tests in 3.5% NaCl solution saturated with Mg (OH) 2, and by salt spray. Alloys …
Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys
M Liu, PJ Uggowitzer, AV Nagasekhar, P Schmutz… - Corrosion …, 2009 - Elsevier
The corrosion of commercial die-cast Mg–Al alloys was elucidated by a study, of the
corrosion in 3% NaCl, of (i) high-pressure die-cast (HPDC) model Mg–Al alloys,(ii) low-purity …
corrosion in 3% NaCl, of (i) high-pressure die-cast (HPDC) model Mg–Al alloys,(ii) low-purity …
Critical review on fusion welding of magnesium alloys: metallurgical challenges and opportunities
M Pouranvari - Science and Technology of Welding and Joining, 2021 - Taylor & Francis
As the lightest structural alloys, magnesium alloys offer significant potential for improving the
energy efficiency of various transportation systems. The lack of sufficient weldability of Mg …
energy efficiency of various transportation systems. The lack of sufficient weldability of Mg …
Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid
Z Wen, C Wu, C Dai, F Yang - Journal of Alloys and Compounds, 2009 - Elsevier
The corrosion behaviors of pure magnesium (Mg) and three Mg alloys with different Al
contents were investigated in a modified simulated body fluid (m-SBF) through immersion …
contents were investigated in a modified simulated body fluid (m-SBF) through immersion …
Corrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)
Microstructure and corrosion behaviour of a Mg-9Al alloy with minor alloying additions (Mn,
Y, Nd, Ca and Sn) are evaluated. All of the additions form Al-rich intermetallics with varying …
Y, Nd, Ca and Sn) are evaluated. All of the additions form Al-rich intermetallics with varying …
The relation between microstructure and corrosion behavior of AZ80 Mg alloy following different extrusion temperatures
M Ben-Haroush, G Ben-Hamu, D Eliezer, L Wagner - Corrosion Science, 2008 - Elsevier
Cast AZ80 alloy was subjected to conventional extrusion pressing at 250° C, 300° C, and
350° C. In order to characterize the changes in their microstructure a thorough study was …
350° C. In order to characterize the changes in their microstructure a thorough study was …
Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy
Microstructures, tensile properties and work hardening behavior of double-sided arc welded
(DSAWed) and friction stir welded (FSWed) AZ31B-H24 magnesium alloy sheet were …
(DSAWed) and friction stir welded (FSWed) AZ31B-H24 magnesium alloy sheet were …