Recent advances in researches on vehicle scanning method for bridges
The vehicle scanning method (VSM), an indirect approach for bridge measurement, has
attracted intensive attention since it was proposed by Yang and co-workers in 2004. This …
attracted intensive attention since it was proposed by Yang and co-workers in 2004. This …
[HTML][HTML] A review of mobile sensing of bridges using moving vehicles: Progress to date, challenges and future trends
A Malekjafarian, R Corbally, W Gong - Structures, 2022 - Elsevier
Sensors installed on moving vehicles have been extensively used for condition monitoring
and structural assessment of bridges in the recent years. These methods which are known …
and structural assessment of bridges in the recent years. These methods which are known …
State-of-the-art review on modal identification and damage detection of bridges by moving test vehicles
In 2004, Yang and co-workers proposed the extraction of bridge frequencies from the
dynamic response of a moving test vehicle [YB Yang, CW Lin and JD Yau, Extracting bridge …
dynamic response of a moving test vehicle [YB Yang, CW Lin and JD Yau, Extracting bridge …
A data-driven approach for drive-by damage detection in bridges considering the influence of temperature change
R Corbally, A Malekjafarian - Engineering Structures, 2022 - Elsevier
This paper proposes the use of a new data-driven approach for drive-by monitoring of bridge
condition. The proposed algorithm uses an Artificial Neural Network (ANN) which is trained …
condition. The proposed algorithm uses an Artificial Neural Network (ANN) which is trained …
[HTML][HTML] Deep autoencoder architecture for bridge damage assessment using responses from several vehicles
Vehicle-assisted monitoring is a promising alternative for rapid and low-cost bridge health
monitoring compared to direct instrumentation of bridges. In recent years, centralized …
monitoring compared to direct instrumentation of bridges. In recent years, centralized …
Indirect health monitoring of bridges using Mel-frequency cepstral coefficients and principal component analysis
Bridge health monitoring is a very important part for infrastructure maintenance. Traditional
bridge health monitoring techniques require sensors to be installed on bridges, which is …
bridge health monitoring techniques require sensors to be installed on bridges, which is …
[HTML][HTML] Diagnosis algorithms for indirect bridge health monitoring via an optimized AdaBoost-linear SVM
A data-driven approach based on Optimized AdaBoost-Linear SVM is proposed to indicate
the bridge damage using only raw vibration signals received from a vehicle passing over the …
the bridge damage using only raw vibration signals received from a vehicle passing over the …
A novel frequency-free movable test vehicle for retrieving modal parameters of bridges: Theory and experiment
Vehicle frequency and pavement roughness are two factors that used to adversely affect the
vehicle scanning method for bridges. To tackle these at once, this study proposes the use of …
vehicle scanning method for bridges. To tackle these at once, this study proposes the use of …
[图书][B] Vehicle scanning method for bridges
Presents the first ever guide for vehicle scanning of the dynamic properties of bridges
Written by the leading author on the subject of vehicle scanning method (VSM) for bridges …
Written by the leading author on the subject of vehicle scanning method (VSM) for bridges …
State-of-the-art of vehicle-based methods for detecting various properties of highway bridges and railway tracks
The vehicle scanning method (VSM), an indirect approach for bridge measurement, has
attracted intensive attention since it was proposed. By this method, a moving test vehicle is …
attracted intensive attention since it was proposed. By this method, a moving test vehicle is …