A review of dynamic recrystallization phenomena in metallic materials
The dynamic recrystallization (DRX) phenomena occurring in different thermo-mechanical
processing (TMP) conditions for various metallic materials are reviewed. Several types of …
processing (TMP) conditions for various metallic materials are reviewed. Several types of …
Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys
The roles of rare earth elements on the texture weakening of Mg alloy are critically
assessed. Two main roles are (i) the changing of stacking fault energy of Mg and (ii) the …
assessed. Two main roles are (i) the changing of stacking fault energy of Mg and (ii) the …
Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion
In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …
temperature extrusion. The microstructure and mechanical properties of the alloy were …
[HTML][HTML] A pseudo thermo-mechanical model linking process parameters to microstructural evolution in multilayer additive friction stir deposition of magnesium alloy
Additive friction stir deposition has been proposed as a disruptive manufacturing process;
involving complex thermo-mechanical mechanisms during multilayer material deposition …
involving complex thermo-mechanical mechanisms during multilayer material deposition …
Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation
H Mirzadeh - Mechanics of Materials, 2014 - Elsevier
The constitutive behaviors of Mg–Al–Zn magnesium alloys during hot deformation were
studied over a wide range of Zener–Hollomon parameters by consideration of physically …
studied over a wide range of Zener–Hollomon parameters by consideration of physically …
Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical …
The flow behavior of the Mg–3Gd–1Zn (GZ31) magnesium alloy during hot working was
critically analyzed and dislocation glide in the form of a viscous drag process (viscous glide) …
critically analyzed and dislocation glide in the form of a viscous drag process (viscous glide) …
Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy
XX Wang, M Zhan, PF Gao, PY Ma, K Yang… - Materials Science and …, 2020 - Elsevier
Dynamic recrystallization (DRX) plays great roles in the microstructure refinement and
property improvement during hot working of titanium alloys. Various deformation modes in …
property improvement during hot working of titanium alloys. Various deformation modes in …
Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy
Hot deformation behavior of as-extruded ZK60 magnesium alloy was investigated using
uniaxial hot compression tests over the temperature range of 300–450° C under strain rates …
uniaxial hot compression tests over the temperature range of 300–450° C under strain rates …
Promotion of texture weakening in magnesium by alloying and thermomechanical processing:(I) alloying
M Sanjari, A Farzadfar, ASH Kabir… - Journal of Materials …, 2014 - Springer
The recrystallization and texture evolution of four Mg–Zn–Ce sheets with a warm-rolled
microstructure obtained through two stages that can be characterised as rough rolling and …
microstructure obtained through two stages that can be characterised as rough rolling and …
Characteristics of magnesium AZ31 alloys subjected to high speed rolling
Magnesium AZ31 alloy sheets were rolled at a high (1000 m/min) and a low (15 m/min)
rolling speed. The microstructure and texture evolution were tracked using optical …
rolling speed. The microstructure and texture evolution were tracked using optical …