Phase‐change materials (PCMs) are seeing tremendous interest for their use in
reconfigurable photonic devices; however, the most common PCMs exhibit a large …

Light strongly interacts with structures that are of a similar scale to its wavelength, typically
nanoscale features for light in the visible spectrum. However, the optical response of these …

Summary Antimony sulfide, Sb 2 S 3, is interesting as the phase-change material for
applications requiring high transmission from the visible to telecom wavelengths, with its …

Sb2S3 has great potential to become a good phase‐change material for visible and near‐
infrared wavebands due to its low loss and high refractive index contrast, so great interest …

Smooth and compact thin films of amorphous and crystalline antimony sulfide (Sb2S3) were
prepared by radio frequency sputtering of an Sb2S3 target. As-deposited films are …

Thin films of polyethylenimine-stabilized Sb2S3 are prepared via electrophoretic deposition
(EPD), showing strong adhesion between the deposited layers and the underlying substrate …

Sb 2 S 3 thin films have been obtained by physical vapour deposition on LiNbO 3 and glass
substrates. Films with amorphous structure originally became polycrystalline by annealing in …

The structural organization of Sb2O3–SbPO4 glasses has been studied by FTIR, Raman,
31P MAS and spin echo NMR, Mössbauer and X-ray absorption spectroscopy (EXAFS and …

The amorphous-to-crystalline phase change induced by a continuous-wave laser was
investigated systematically in the case of as-grown amorphous films of, and and results were …

Thin films of Sb_2S_3 were deposited on glass substrates at 300 K by chemical bath
deposition (CBD) technique and annealed at various temperatures. The absorption …