The article reviews the difficulties and its redressal in fusion welding (especially the most
used welding processes in the industry; gas metal arc (GMA) and gas tungsten arc (GTA) …

Multi-pass TIG welding was conducted on plates (15× 300× 180 mm 3) of aluminum alloy Al-
5083 that usually serves as the component material in structural applications such as …

The present research aims to investigate the combined influence of arc current and travel
speed in terms of heat input during tungsten inert gas (TIG) welding and examine it through …

The use of aluminum alloys to reduce weight in air, sea, and land vehicles is increasing
rapidly, especially due to their low density, excellent corrosion resistance, good forming …

This work aims to optimize the performance evaluation characteristics such as the
temperature at the weld center of the lap joint (Tw), the tensile shear load (TSL), and the …

Non-heat-treatable 5xxx Al alloys exhibit good corrosion resistance but can be susceptible
to intergranular corrosion in service. This study applies a cyclic strengthening method to the …

This study presents a novel pulsed current arc welding technology, specifically pulsed
current gas tungsten arc welding (PC-GTAW), single and double pulse gas metal arc …

In FSW, tool pin profile has a significant contribution on mechanical and microstructural
properties of metallic joints. In the present work, various pin profiles such as conical, pedal …

Fusion welding is extensively used for joining structural assemblies, especially those with
complex geometries. However, it often results in heat-affected zones (HAZ) that are, in most …

Friction stir welding (FSW) and gas tungsten arc welding (GTAW) were employed to
manufacture the spiral pipes by a double-sided synchronization approach. The fatigue crack …