Advances of SiC-based MOS capacitor hydrogen sensors for harsh environment applications

MT Soo, KY Cheong, AFM Noor - Sensors and Actuators B: Chemical, 2010 - Elsevier
SiC-based hydrogen sensors have attracted much attention due to applications in harsh
environments. In this paper, harsh environment is defined. Characteristics of SiC-based …

Capacitive gas and vapor sensors using nanomaterials

P Bindra, A Hazra - Journal of materials science: Materials in electronics, 2018 - Springer
An immense number of sensors has been reported in the literature employing various
methods for the detection of different gases and vapors. This article summarizes those …

A low temperature hydrogen sensor based on palladium nanoparticles

D Gupta, D Dutta, M Kumar, PB Barman… - Sensors and Actuators B …, 2014 - Elsevier
Palladium nanoparticles were synthesized by employing Polyol solution chemistry
technique. In this method ethylene glycol was used to reduce sodium tetrachloropalladate at …

Balancing Pd–H Interactions: Thiolate‐Protected Palladium Nanoclusters for Robust and Rapid Hydrogen Gas Sensing

Z Chen, P Yuan, C Chen, X Wang, J Wang… - Advanced …, 2024 - Wiley Online Library
The transition toward hydrogen gas (H2) as an eco‐friendly and renewable energy source
necessitates advanced safety technologies, particularly robust sensors for H2 leak detection …

Capacitive humidity sensing properties of SiC nanowires grown on silicon nanoporous pillar array

HY Wang, YQ Wang, QF Hu, XJ Li - Sensors and Actuators B: Chemical, 2012 - Elsevier
A large quantity of entangled SiC nanowires (nw-SiC) with an average diameter of∼ 15nm
were grown on a silicon nanoporous pillar array (Si-NPA) by a catalyst-assisted chemical …

Nanocrystalline ruthenium oxide and ruthenium in sensing applications–an experimental and theoretical study

A Salomonsson, RM Petoral, K Uvdal, C Aulin… - Journal of Nanoparticle …, 2006 - Springer
In this project, we have explored RuO 2 and Ru nanoparticles (∼∼ 10 and∼∼ 5 nm,
respectively, estimated from XRD data) to be used as gate material in field effect sensor …

Dependence of electrical resistivity on sintering conditions of silver layers printed by InkJet printing technology

P Lukacs, A Pietrikova, P Cabuk - Circuit World, 2017 - emerald.com
Purpose The purpose of this paper is to find optimal sintering conditions of silver-based
nano-inks for achieving the high electrical conductivity of the deposited layers applied on …

Data fusion and fault diagnosis for flexible arrayed pH sensor measurement system based on LabVIEW

JC Chou, CY Lin, YH Liao, JT Chen… - IEEE Sensors …, 2013 - ieeexplore.ieee.org
This paper concerns the data fusion (DF) and fault diagnosis (FD), which could increase the
reliability of measured results when one sensing window was faulty. The flexible arrayed pH …

Room-temperature NH3 gas sensing of S-hyperdoped silicon: Optimization through substrate resistivity

Y Li, H Li, G Feng, W Wang, B Dong, L Zhao… - Applied Physics …, 2024 - pubs.aip.org
Sulfur-hyperdoped black silicon (S-BSi) prepared by femtosecond laser-assisted etching in
SF 6 atmosphere has dual characteristics of large specific surface area and super-doped …

Improvement of the evaluation of inkjet printed silver based layers' adhesion

P Lukacs, A Pietrikova, O Kovac - Journal of Adhesion Science and …, 2019 - Taylor & Francis
This paper presents the improved method of analysis and evaluation of the silver layers'
adhesion printed by inkjet printing technology. The generally known method for adhesion …