The hot deformation behavior and microstructure evolution of 6082 aluminum alloy
fabricated through squeeze casting (SC) under different pressures were studied. The alloy …

The extrusion parameters greatly influence the microstructures of aluminum alloys, and
further determine the mechanical properties of the final products. In this work, using a self …

The integrated forming process of an Al-Mg-Si alloy was designed, which combined solution
heat treatment (SHT) and hot forging into one operation followed by artificial aging. The …

In this work, additively manufactured (AM) tool steel discs were prepared by selective laser
melting (SLM) and subjected to pin-on-disc experiments in contact to aluminium alloy pin at …

This paper deals with the thermomechanical coupling in dissipative materials. The focus lies
on finite strain plasticity theory and the temperature increase resulting from plastic …

The present work focuses on the effect of thermo-mechanical processing on the mechanical
properties and microstructural evolution of AA6082 and AA7075 aluminum alloys using a …

Multiple hot-compression tests were carried out on the 6082 aluminum (Al) alloy using a
Gleeble-1500 thermal simulation testing machine. Data on flow stresses of the 6082 Al alloy …

The research was aimed to determine the effects of extrusion process condition on the weld
seam quality of the aluminum alloy AA6082 by using a novel physical simulation method. A …

The dynamic recrystallization behaviors of 6082 aluminum alloy in the temperature range of
623–773 K and strain rate range of 0.01–5 s− 1 were studied by electron back scattered …

利用MMS-100 热/力模拟试验机对固溶态7075 铝合金进行了热压缩试验, 构建了能描述合金在
温度为350~ 450℃, 应变速率为0.01~ 10 s-1 条件下流变应力规律的本构方程 …