Effect of Hf addition in (Ni, Pt) Al bond coat on thermal cycling behavior of a thermal barrier coating system at 1100° C
C Jiang, S Li, H Liu, Z Bao, J Zhang, S Zhu, F Wang - Corrosion science, 2020 - Elsevier
Thermal cycling behavior of thermal barrier coatings deposited on Hf-doped (Ni, Pt) Al bond
coats were investigated, comparing with conventional (Ni, Pt) Al at 1100° C, to elucidate the …
coats were investigated, comparing with conventional (Ni, Pt) Al at 1100° C, to elucidate the …
The correlation between tetragonal phase and the undulated metal/oxide interface in the oxide films of zirconium alloys
J Liao, Z Yang, S Qiu, Q Peng, Z Li, J Zhang - Journal of Nuclear Materials, 2019 - Elsevier
The transition mechanism is of significance to the corrosion behavior of zirconium alloys.
Two important phenomena may be the causes of transition, which are the undulated wavy …
Two important phenomena may be the causes of transition, which are the undulated wavy …
Effect of substrate curvature on residual stresses and failure modes of an air plasma sprayed thermal barrier coating system
A set of aerofoil shaped air plasma sprayed thermal barrier coated (APS-TBC) specimens
were adopted in this paper to investigate the stress distributions in the ceramic top coat (TC) …
were adopted in this paper to investigate the stress distributions in the ceramic top coat (TC) …
Stress analysis and failure mechanisms of plasma-sprayed thermal barrier coatings
J Yang, L Wang, D Li, X Zhong, H Zhao… - Journal of Thermal Spray …, 2017 - Springer
Yttria-stabilized zirconia coatings were deposited by plasma spraying and heat-treated at
1100° C for 50, 100, 150, and 200 h in air, respectively. Mechanical properties including …
1100° C for 50, 100, 150, and 200 h in air, respectively. Mechanical properties including …
Evolution of the residual stress in porous ceramic abradable coatings under thermal exposure
Y Cui, M Guo, C Wang, Z Tang, L Cheng - Surface and Coatings …, 2020 - Elsevier
Porous dysprosium-stabilized zirconia (DySZ) based abradable coatings were fabricated on
DD5 superalloy by atmospheric plasma spraying technique (APS). The residual stress of the …
DD5 superalloy by atmospheric plasma spraying technique (APS). The residual stress of the …
Zirconia-based abradable coatings fabricated on single-crystal superalloy: Microstructure, residual stress and mechanical properties
Y Cui, M Guo, C Wang, J Jiao, L Cheng - Journal of Alloys and Compounds, 2022 - Elsevier
Thermal sprayed ZrO 2-based abradable coatings have shown great advantages in
blade/shroud clearance control systems of aero-engine turbine components due to their …
blade/shroud clearance control systems of aero-engine turbine components due to their …
Raman measurements of stress in films and coatings
D Liu, PEJ Flewitt - 2014 - books.rsc.org
Films and coatings have become widely used in structures and components to protect the
underlying material from mechanical degradation, corrosion, oxidation and high …
underlying material from mechanical degradation, corrosion, oxidation and high …
Plasma sprayed YSZ coatings deposited at different deposition temperatures, part 1: Splats, microstructures, mechanical properties and residual stress
S Li, Y An, H Zhou, J Chen - Surface and Coatings Technology, 2018 - Elsevier
In the present investigation, yttrium stabilized zirconia (YSZ) splats and coatings are plasma
sprayed onto 316L stainless steel with different temperatures. The influence of deposition …
sprayed onto 316L stainless steel with different temperatures. The influence of deposition …
Evolution of residual stresses in PS-PVD thermal barrier coatings on thermal cycling
J Yang, H Zhao, X Zhong, J Ni, Y Zhuang… - Journal of Thermal …, 2018 - Springer
Plasma spray-physical vapor deposition (PS-PVD) is an advanced technique to fabricate
quasi-columnar structured thermal barrier coatings (TBCs) with excellent thermal cyclic …
quasi-columnar structured thermal barrier coatings (TBCs) with excellent thermal cyclic …
[PDF][PDF] A synchrotron X-ray diffraction deconvolution method for the measurement of residual stress in thermal barrier coatings as a function of depth
The average residual stress distribution as a function of depth in an air plasma-sprayed yttria
stabilized zirconia top coat used in thermal barrier coating (TBC) systems was measured …
stabilized zirconia top coat used in thermal barrier coating (TBC) systems was measured …