Influence of the nose radius on the machining forces induced during AISI-4140 hard turning: A CAD-based and 3D FEM approach
A Tzotzis, C García-Hernández, JL Huertas-Talón… - Micromachines, 2020 - mdpi.com
The present study investigated the performance of three ceramic inserts in terms of the micro-
geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model …
geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model …
Cad-based 3d-fe modelling of aisi-d3 turning with ceramic tooling
In this study, the development of a 3D Finite Element (FE) model for the turning of AISI-D3
with ceramic tooling is presented, with respect to four levels of cutting speed, feed, and …
with ceramic tooling is presented, with respect to four levels of cutting speed, feed, and …
Cutting parameters optimization for minimal total operation time in turning POM-C cylindrical stocks into parts with continuous profile using a PCD cutting tool
Turning is a complex machining process that can be characterized by a number of
performances for a given machining system, workpiece material, cutting tool, and selected …
performances for a given machining system, workpiece material, cutting tool, and selected …
3D-FEM approach of AISI-52100 hard turning: modelling of cutting forces and cutting condition optimization
In the present study, a 3D finite element (FE) model for machining AISI-52100 steel was
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
CAD-based automated design of FEA-ready cutting tools
A Tzotzis, C García-Hernández… - … of Manufacturing and …, 2020 - mdpi.com
The resources of modern Finite Element Analysis (FEA) software provide engineers with
powerful mechanisms that can be used to investigate numerous machining processes with …
powerful mechanisms that can be used to investigate numerous machining processes with …
[HTML][HTML] Influence of the 3D Printing Fabrication Parameters on the Tensile Properties of Carbon-Based Composite Filament
In this study, the effect of certain 3D printing conditions on the tensile strength of 3D-printed
specimens was investigated. The printing material was CARBON: PLUS (NEEMA3D™ …
specimens was investigated. The printing material was CARBON: PLUS (NEEMA3D™ …
Comparative evaluation of coated carbide and CBN inserts performance in dry hard-turning of AISI 4140 steel using taguchi-based grey relation analysis
Dry hard-turning is a vital manufacturing method for machining hardened steel due to its low
cost, high machining efficiency, and green environmental protection. This study aims to …
cost, high machining efficiency, and green environmental protection. This study aims to …
[HTML][HTML] Surface Quality Evaluation of 3D-Printed Carbon-Fiber-Reinforced PETG Polymer During Turning: Experimental Analysis, ANN Modeling and Optimization
This work presents an experimental analysis related to 3D-printed carbon-fiber-reinforced-
polymer (CFRP) machining. A polyethylene-terephthalate-glycol (PETG)-based composite …
polymer (CFRP) machining. A polyethylene-terephthalate-glycol (PETG)-based composite …
[HTML][HTML] Multivariate modelling of AA6082-T6 drilling performance using RSM, ANN and response optimization
The AA6082-T6 was experimentally studied in the present research with respect to the
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …
Investigation into the effect of cutting conditions in turning on the surface properties of filament winding gfrp pipe rings
There are numerous engineering applications where Glass Fiber Reinforced Polymer
(GFRP) composite tubes are utilized, such as desalination plants, power transmission …
(GFRP) composite tubes are utilized, such as desalination plants, power transmission …