Eutectic high-entropy alloys (EHEAs), combining the advantages of both eutectic alloys and
high-entropy alloys (HEAs), possess good castability and superior comprehensive …

As one of the common internal defects in the aluminum welding process, porosity defect is
still challenging for real-time control due to the complexity and diversity of the welding …

In the present work, the attempt to weld coarse (CG) and ultrafine-grained (UFG) Al-Mg-Si
alloy using an electron beam welding technique has been taken. Welding parameters were …

A definitive understanding of the addition of Si on the mechanism of intergranular corrosion
(IGC) in Al–Mn–Fe–Mg–Cu alloy is still unclear. The microstructure at the grain boundaries …

Wire-and arc-based additive manufacturing (WA-AM) technology is a prominent solution to
produce components having large-scale dimensions in terms of elevated deposition rates …

Duplex stainless steels (DSS), due to their high corrosion resistance, primarily attributed to
their austenite‐ferrite duplex microstructure, are widely used in industrial sector such as …

Preparation of ceramic reinforced coating on aluminum alloy surface is a common method to
improve the wear resistance. Traditional methods usually have some drawbacks such as …

A definitive understanding of the addition of Si on the mechanism of intergranular corrosion
(IGC) in Al-Fe-Mn-Mg-Cu alloy is still unclear. The microstructure at the grain boundaries in …