Chatter detection in milling processes—a review on signal processing and condition classification
Among the diverse challenges in machining processes, chatter has a significant detrimental
effect on surface quality and tool life, and it is a major limitation factor in achieving higher …
effect on surface quality and tool life, and it is a major limitation factor in achieving higher …
Analytical modeling and prediction of cutting forces in orthogonal turning: a review
W Sujuan, Z Tao, D Wenping, S Zhanwen… - The international journal …, 2021 - Springer
The knowledge of cutting forces in various machining processes is of great importance not
only for the designer-manufacturer of machine tools, but also for the user, since the cutting …
only for the designer-manufacturer of machine tools, but also for the user, since the cutting …
Nonlinear vibrations of a slightly curved beam with nonlinear boundary conditions
The existing studies of nonlinear vibration of elastic structures are usually focused on
straight structures with homogeneous linear boundaries. Differently, this paper investigates …
straight structures with homogeneous linear boundaries. Differently, this paper investigates …
A new approach for the determination of the Iwan density function in modeling friction contact
Friction between interfaces seriously affects the dynamics of structures with joints. An
accurate description of the friction behavior, usually given in the form of hysteresis loops, is …
accurate description of the friction behavior, usually given in the form of hysteresis loops, is …
Research on the cutting dynamics for face-milling of spiral bevel gears
F Zheng, X Han, H Lin, W Zhao - Mechanical Systems and Signal …, 2021 - Elsevier
For an efficient and precise machining of spiral gear, the special face-milling process for
spiral bevel gear is developed and widely used, exhibiting great difference from the general …
spiral bevel gear is developed and widely used, exhibiting great difference from the general …
Nonlinear dynamics of lump mass model of drill-string in horizontal well
D Xie, Z Huang, Y Ma, V Vaziri, M Kapitaniak… - International Journal of …, 2020 - Elsevier
We develop a dynamic model of a drill-string in a horizontal well having six Degrees-Of-
Freedom, which accounts for longitudinal, lateral and torsional motions. In this model …
Freedom, which accounts for longitudinal, lateral and torsional motions. In this model …
Autonomous grinding algorithms with future prospect towards SMART manufacturing: A comparative survey
Autonomous Grinding (AG) is a unique kind of manufacturing process which needs extra
operative care, for both robot and environment. Due to the rapid growth of research on AG, a …
operative care, for both robot and environment. Due to the rapid growth of research on AG, a …
Nonlinear dynamics of friction-induced regenerative chatter in internal turning with process damping forces
Stability in internal turning operation depends on several factors such as cutting conditions,
tool overhang, associated tool dynamics, regeneration, friction and process damping. In the …
tool overhang, associated tool dynamics, regeneration, friction and process damping. In the …
An accurate and fast milling stability prediction approach based on the Newton-Cotes rules
W Li, L Wang, G Yu - International Journal of Mechanical Sciences, 2020 - Elsevier
Regenerative chatter is the main factor causing milling instability. The stability prediction of
milling process is a useful method to suppress chatter, improve machining efficiency and …
milling process is a useful method to suppress chatter, improve machining efficiency and …
Effect of state-dependent time delay on dynamics of trimming of thin-walled structures
SL Ma, T Huang, XM Zhang, M Wiercigroch… - International Journal of …, 2022 - Elsevier
Trimming of cantilever thin-walled structures is commonly seen in aerospace industry,
including trimming of blades. Trimming with helix angle tools can cause the vibration of the …
including trimming of blades. Trimming with helix angle tools can cause the vibration of the …