[HTML][HTML] Aluminium scrap recycling in a production furnace: Minimizing dross formation for sustainable and efficient recovery
This study investigates the optimal conditions for recycling aluminium troma scraps in a 100
kg production furnace, with a focus on minimizing the formation of toxic dross while …
kg production furnace, with a focus on minimizing the formation of toxic dross while …
Effect of multiple remelting on behaviour of AlSi5Cu3 aluminium alloy
RP Barot, MP Sutaria - Materials Today: Proceedings, 2022 - Elsevier
The present paper investigated the microstructural behaviour and mechanical properties of
AlSi5Cu3 alloy after multiple remelting. The AlSi5Cu3 alloy is selected owing to excellent …
AlSi5Cu3 alloy after multiple remelting. The AlSi5Cu3 alloy is selected owing to excellent …
Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
C Yolcu, F Kahraman - Materials Testing, 2022 - degruyter.com
Aluminum matrix composites focus primarily on improving mechanical properties such as
hardness and wear, however, the softness of the aluminum matrix and thermal coefficient …
hardness and wear, however, the softness of the aluminum matrix and thermal coefficient …
[PDF][PDF] The effect of Ni addition on microstructure and mechanical properties of cast A356 alloy modified with Sr.
In this study, casting A356 alloy was pre-alloyed with Ni, and the modification process with
Sr was applied by the casting method. The role of Ni on the microstructural and mechanical …
Sr was applied by the casting method. The role of Ni on the microstructural and mechanical …
Microstructure and properties of high strength Al-Fe-Cu-Si-Zn alloy (AA8079) produced by mechanical alloying and powder metallurgy
M Meignanamoorthy, M Ravichandran, VS Vidhya… - Materials …, 2019 - degruyter.com
The intent of this work is to synthesize Al-Fe-Cu-Si-Zn alloy (AA8079) at different milling
hours, ie 1, 10, 20, 30 and 40 h, by mechanical aloying (MA). X-ray diffraction (XRD) and …
hours, ie 1, 10, 20, 30 and 40 h, by mechanical aloying (MA). X-ray diffraction (XRD) and …
Change in the oxide structure of Al-12Si melts in the presence of Sr
C Kahruman, U Alev, D Dıspınar - Politeknik Dergisi, 2023 - dergipark.org.tr
Bifilm defects are the surface entrained double oxide films that are introduced into melts
during turbulence and disturbance to the surface of the melt. These defects lead to porosity …
during turbulence and disturbance to the surface of the melt. These defects lead to porosity …