In the last decade, the analysis and recycling of aluminum alloy continue to raise additional
concerns. A large number of aluminum alloy grades and their similar appearance makes it …

The effect of mechanical and tribological behaviour of aluminium alloy (Al-Si10-Mg) with
sugarcane bagasse ash and silicon carbide reinforced metal matrix composites were …

A novel hot stamping technique known as 'Solution Heat treatment, Forming and in-die
Quenching (HFQ®)'was employed to manufacture lightweight structural components from …

In this work, a uniform superhydrophilic coating was prepared by grafting N-(2-aminoethyl)-3-
aminopropyltriethoxysilane oligomers (AEAOS) onto nanosilica by using silane coupling …

The high weight-to-strength ratio of AA6061 aluminum alloys presents increased potential
applications in industries such as automotive and aircraft. However, its limited formability at …

This research paper presents a comparative numerical analysis to study the effect of drilling
a center hole in an aluminum sheet on the static loading, linear buckling and modal …

This paper presents a new solution for shaping the rivet progression of a beverage end. The
classic method uses three operations to press the cylindrical rivet using 0.208 mm and 0.203 …

This research paper has performed the stress analysis of a uniformly static loaded plate of
aluminum alloy AA2024-T3 from both ends and is center drilled using ANSYS. Analytical …

Aluminum alloy sheets are widely used in different industries that the main reason is the
high strength to weight ratio of these sheets. Among these sheets, the 6061-aluminum alloy …

Solid particle erosion is a phenomenon associated with the loss of material from
engineering elements due to the impingement of particles. The aim of this research is to …