Iron-based shape memory alloys are promising candidates for large-scale structural
applications due to their cost efficiency and the possibility of using conventional processing …

Abstract Compared with Ti–Ni-based and Cu–Al-based alloys, Fe–Ni–Co–Al-based
superelastic alloys have received great attention in recent years because of their low cost …

In this paper, the evolution of microstructure in Fe–Ni–Co–Al polycrystalline alloys and its
effects on mechanical properties were systematically investigated. The results show that the …

The effect of thermomechanical treatments on grain size and precipitate evolution as well as
their impact on the shape memory properties of cold-drawn Fe41–Ni28–Co17–Al11. 5–Ti2 …

The precipitation behavior of tantalum (Ta) and NiAl along grain boundaries has been
investigated in polycrystalline Fe-28.5 Ni-17.5 Co-11.5 Al-2.5 Ta-0.05 B (NCATB)(at%) alloy …

The solvus temperature of face-centered cubic (FCC) phase in Fe–34Mn–x Al–4Cr–7.5 Ni
(x= 13, 14, and 15) shape memory alloys with different Al contents, and their abnormal grain …

Fe-based superelastic alloys, which show both superelasticity and high damping capacity,
can be divided into four alloy systems based on the characteristics of the martensite …

In order to overcome constraints related to crack formation during additive processing (laser
powder bed fusion, L-BPF) of Fe-Mn-Al-Ni, the potential of high-temperature L-PBF …

In the present study the structural and functional properties of Fe–Mn–Al–Ni shape memory
alloy sheets produced on an industrial process route focusing on hot rolling were …

In this paper, the effects of Mo addition on the precipitation behaviors of L1 2 structured γ'(Ni
3 Al) phase and B2 structured β (NiAl) phases and the martensite transformation in Fe 43.5-x …