Microstructure-property relationships in high chromium white iron alloys
CP Tabrett, IR Sare… - International materials …, 1996 - journals.sagepub.com
High chromium white irons are ferrous based alloys containing 11–30 wt-% chromium and
1.8–3.6 wt-% carbon, with molybdenum, manganese, copper, and nickel sometimes added …
1.8–3.6 wt-% carbon, with molybdenum, manganese, copper, and nickel sometimes added …
Consumption of steel grinding media in mills–A review
C Aldrich - Minerals Engineering, 2013 - Elsevier
In this study, the current understanding of the factors affecting the consumption of steel
media in comminution systems in mineral processing are reviewed, together with models …
media in comminution systems in mineral processing are reviewed, together with models …
Tribological mechanisms of slurry abrasive wear
Abrasive wear mechanisms—including two-body and three-body abrasion—dominate the
performance and lifespan of tribological systems in many engineering fields, even of those …
performance and lifespan of tribological systems in many engineering fields, even of those …
Methods of wear testing for advanced surface coatings and bulk materials
DM Kennedy, MSJ Hashmi - Journal of Materials Processing Technology, 1998 - Elsevier
This paper examines methods of assessing the wear resistance of coated and uncoated
materials. Test equipment for sliding wear, erosion, impact and dynamic wear tests is …
materials. Test equipment for sliding wear, erosion, impact and dynamic wear tests is …
Wear in rolling contacts
HA Spikes, AV Olver, PB Macpherson - Wear, 1986 - Elsevier
Unexpectedly high uniform rates of wear occur from time to time in concentrated lubricated
rolling contacts having low slide-roll ratios. Such wear can occur under quite mild conditions …
rolling contacts having low slide-roll ratios. Such wear can occur under quite mild conditions …
The failure models induced by white layers during impact wear
YY Yang, HS Fang, YK Zheng, ZG Yang, ZL Jiang - Wear, 1995 - Elsevier
The characteristics of impact wear of high hardness steel have been studied by repetitive
impact testing. The subsurface microstructure and wear debris have been investigated, and …
impact testing. The subsurface microstructure and wear debris have been investigated, and …
Methodologies for the evaluation of grinding media consumption rates at full plant scale
JE Sepúlveda - Minerals engineering, 2004 - Elsevier
Due recognition of the significant impact of the cost of grinding media on the overall
economics of comminution facilities worldwide has created the need for reliable, practical …
economics of comminution facilities worldwide has created the need for reliable, practical …
Repeated impact-abrasion testing of alloy white cast irons
IR Sare, BK Arnold, GA Dunlop, PG Lloyd - Wear, 1993 - Elsevier
A small Hazemag rotary impact crusher has been adapted for the assessment of the
repeated impact-abrasion properties of alloy white cast irons. The test specimens were cast …
repeated impact-abrasion properties of alloy white cast irons. The test specimens were cast …
Crack propagation and spalling of white cast iron balls subjected to repeated impacts
G Laird II, WK Collins, R Blickensderfer - Wear, 1988 - Elsevier
In ongoing research by the Bureau of Mines directed toward the conservation of strategic
and critical materials, the mechanisms of spalling were investigated in high chromium white …
and critical materials, the mechanisms of spalling were investigated in high chromium white …
Strain hardening of austenite in Fe–Cr–C–V alloys under repeated impact
M Filipovic, E Romhanji - Wear, 2011 - Elsevier
Structural changes were analyzed in Fe–Cr–C–V alloy balls with high chromium and
different vanadium content, after repeated impact load testing. The results indicate that …
different vanadium content, after repeated impact load testing. The results indicate that …