The work presents the research conducted on the impact resistance of newly developed
metal-ceramic composites with aluminum matrix on firing with 5.56× 45 mm caliber …

The paper presents the results of studies on the effects of shooting composite materials
produced by pressure infiltration with the EN AW-7075 alloy as a matrix and reinforcement in …

Fatigue failure of metal parts is common in engineering, and the failure mechanisms remain
to be studied. The crystal plastic finite element method (CPFEM) was used to study the …

The article analyzes the structure and properties of the new composite antifriction materials
based on the powder nickel alloy EI929 with solid lubricant CaF 2 additives for exploitation …

This paper focuses on the investigation of the diagnostic system for health monitoring and
defects, detecting in composite structures using a piezoelectric sensor. A major overview of …

A study of dolomite rock material failure using a simple small-scale blast setup is presented.
Laboratory tests were conducted using disc specimens drilled with a borehole in the center …

The paper is devoted to studying the chemical elements distribution in the material's
structure depending on the manufacturing technological parameters and their effect on …

The article contains a comparison of selected numerical methods describing the structure of
polymer composite. This work focuses on different FEM modeling methods using …

The behaviour of porous sinters, during compression and compression with reverse cyclic
torsion tests is investigated in the article based on the combination of experimental and …

The paper presents the results of experimental-numerical tests of firing at aluminum
composite materials. The test materials were manufactured by pressure infiltration of porous …