Zr alloy specimens were coated with Cr–Al alloy to enhance their resistance to oxidation.
The coated samples were oxidized at 1200° C in a steam environment for 300 s and showed …

The Al–Ni–Cr phase diagram was specified at 1000° C and partially at 900° C. The results
concerning the region below 60at.% Al agreed qualitatively with the literature data. The …

A re-assessment of the thermodynamic parameters of the binary Cr–Ti system and a first
assessment of the ternary Al–Cr–Ti system were performed. The new Cr–Ti description …

Stable decagonal quasicrystals were revealed for the first time in the Al-Fe-Cr and Al-Fe-Mn
alloy systems. They exhibit periodicity of∼ 1.2 nm along the 10-fold symmetry axis and are …

A long lasting controversy on the nature of the reaction between liquid, Al and Al 45 Cr 7 has
been ended by planar front solidification experiments of Al–Cr alloy in a Bridgman furnace …

Abstract The Al–Cr–Fe phase diagram was studied in the compositional range of 50–100
at% Al and partial isothermal sections were determined at 1160, 1100, 1075, 1042, 1000 …

In the present paper, the ternary Al–Cr–Ti and binary constituent Al–Cr systems are
thermodynamically re-modelled based on new experimental information reported in the …

Three alloys in the Al–Cr system were investigated by means of X-ray diffraction (XRD) in
order to verify the existence of the reported new phase Al11Cr4. The XRD results showed no …

The Alsingle bondMn alloy system contains complex intermetallics in its Al-rich part, and this
was the first system where quasiperiodic structures were recognized. In the present work …

A combination of both conventional and advanced high-resolution characterization
techniques was applied to study the modified layers on the surface of three composite Al-Cr …