The iron-chromium-aluminum alloy (FeCrAl) is an exceptional support for highly exothermic
and endothermic reactions that operate above 700° C in chemically aggressive …

This review describes advances in the XRF group of techniques published approximately
between April 2018 and March 2019. The review is selective with the aim of providing a …

The present article reports on Rh-containing hydrotalcite (HT) derived catalysts coated on
the surface of open-cell FeCralloy foams. The structured catalysts were prepared by in situ …

The ongoing research and development of sunlight-driven water splitting in the “Japan
Technological Research Association of Artificial Photosynthetic Chemical Process …

Ferroelectric ceramics are a technologically important class of materials that are currently
exploited in actuators, sensors, transducers, and memory devices. The introduction of …

Environmental catalytic processes are probably the best example for the application of
structured catalysts based on activated open-cell metallic foams, and Pd/CeO2 based …

In this work, porous catalytic membrane with tailored microstructure has been developed for
the production of hydrogen from the oxy-reforming process. Porous catalytic membranes …

The valorisation of clean biogas (CH 4/CO 2= 60/40 v/v) by steam reforming over metal open-
cell foam-based structured catalysts was investigated. NiCrAl foams were coated by RuMgAl …

The electrodeposition, in particular the electro-base generation method, is an alternative to
conventional washcoating to coat open-cell metallic foams, especially small pore size ones …

Three series of layered double hydroxides (LDH) with a hydrotalcite-like structure and
composition corresponding to [Mg4Al2 (OH) 12 (CO3)]· 3H2O have been prepared from a …