Experimental and numerical studies on the tensile behaviors of thin-ply and thick-ply open-hole laminates
K Zheng, H Hu, D Cao, Y Zhong, S Li - Thin-Walled Structures, 2023 - Elsevier
Laminated composites with thin-ply unidirectional prepregs are popular due to their higher
in-situ strength as compared with thick-ply laminates due to different failure mechanisms …
in-situ strength as compared with thick-ply laminates due to different failure mechanisms …
Effect of through thickness separation of fiber orientation on low velocity impact response of thin composite laminates
The effect of separation of fiber orientation through the thickness of thin composites on their
low velocity impact response is studied. The composites are prepared using unidirectional …
low velocity impact response is studied. The composites are prepared using unidirectional …
[HTML][HTML] Influence of metal/composite interface on the damage behavior and energy absorption mechanisms of FMLs against projectile impact
This paper focuses on the interface failure in metal/GFRP laminates on account of the high-
velocity impact phenomenon by a hemispherical projectile. The study considers three …
velocity impact phenomenon by a hemispherical projectile. The study considers three …
Towards an advanced modeling of hybrid composite cutting: heat discontinuity at Interface region
In this study, a thermomechanical model is developed to simulate a finite drilling set of
Carbon Fibre Reinforced Polymers (CFRP)/Titanium (Ti) hybrid structures widely known for …
Carbon Fibre Reinforced Polymers (CFRP)/Titanium (Ti) hybrid structures widely known for …
A delamination failure criterion considering the effects of through-thickness compression on the interlaminar shear failure of composite laminates
X Chen, X Sun, P Chen, Y Chai - Composite Structures, 2020 - Elsevier
Through-thickness compressive stress of composite laminates can inhibit the interlaminar
shear failure which has been proved by experiments. However, common delamination …
shear failure which has been proved by experiments. However, common delamination …
Predicting Projectile Residual Velocities using an Advanced Artificial Neural Network Model
In this research, we delve into the fascinating dynamics of projectiles and their interactions
with materials, with a keen focus on residual velocity—the speed a projectile retains after …
with materials, with a keen focus on residual velocity—the speed a projectile retains after …
Numerical analysis of unidirectional carbon-fibre/epoxy composite laminates under low velocity impacts of different forms
Y Zhao, X Zhou - Computational Materials Science, 2024 - Elsevier
Based on the stress initial damage criterion and the improved sudden reduction model of
material stiffness, a user-defined subroutine (VUMAT) was written for the constitutive …
material stiffness, a user-defined subroutine (VUMAT) was written for the constitutive …
Failure assessment of fiber metal laminates based on metal layer dispersion under dynamic loading scenario
In this study, tensile behavior of Glass Fiber Reinforced Polymer (GFRP) sandwiched with
different thickness aluminium alloy layers were investigated at strain rates of the order 400 …
different thickness aluminium alloy layers were investigated at strain rates of the order 400 …
Combined approach for modeling progressive damage in unidirectional CFRP composites
Abstract This investigation addresses Finite Element (FE) modeling of unidirectional carbon
fibre reinforced polymer (CFRP) behavior basing on uniaxial test. The progressive damage …
fibre reinforced polymer (CFRP) behavior basing on uniaxial test. The progressive damage …
Effect of fibre orientation on damage resistance of composite laminates
The present study deals with the behaviour of angle ply composite laminates subjected to
low velocity impact. The laminates were prepared by E-glass fibres as reinforcement and …
low velocity impact. The laminates were prepared by E-glass fibres as reinforcement and …