Recent developments and prospects of copper tin sulphide (Cu2SnS3) thin films for photovoltaic applications

J Raval, B Shah, D Kumar, SH Chaki… - Chemical Engineering …, 2024 - Elsevier
Ternary copper tin sulphide, Cu 2 SnS 3 (CTS) is prominent material of semiconductor
industry due to p-type semiconducting, sufficient band gap, high mobility, high carrier …

A one-step electrodeposition method was used to produce monoclinic Cu2SnS3 thin films for the development of solar cells

A Boudouma, O Ait Layachi, H Hrir… - Journal of Materials …, 2023 - Springer
The monoclinic compound semiconductor Cu2SnS3 (CTS) is a promising material for
absorbing solar energy, with a direct bandgap of 0.9 to 1.7 eV, making it an ideal choice for …

Improving the FOM of photodetectors fabricated by Sn-doped CuS nanostructures

M Kavosh, F Jamali-Sheini, M Cheraghizade… - Solid State …, 2024 - Elsevier
Abstract The Sn-doped CuS nanostructures with different Sn-doping concentrations (Sn 1
(5%), Sn 2 (10%), and Sn 3 (15%)) were synthesized by the sonochemical method. Due to …

Physical properties of Cu2ZnSnS4 absorber layer deposited by Spray Pyrolysis: effect of the temperature associated with SCAPS 1D simulation.

S Smairi, B Hartiti, A Batan, A Ziti, HJT Nkuissi… - Physica B: Condensed …, 2024 - Elsevier
This research basically reports the synthesis and characterization of copper-zinc-thin-sulfide
thin films using spray pyrolysis technique, X-ray Diffraction (XRD), Raman Spectroscopy …

Improvement of physical properties of spin coated Ag2ZnSnS4 thin films synthesis by sol gel spin coating route

A Ziti, B Hartiti, S Smairi, Y Nouri, H Labrim… - Journal of Sol-Gel …, 2024 - Springer
In this paper, thin films of Ag2ZnSnS4 (AZTS) were spin-coated on to ordinary glass
substrates and annealed at temperatures ranging from 300 to 375° C without sulfurization …

Elaboration and characterization of quaternary material Cu2ZnSnS4 by spray pyrolysis technique using Taguchi method

S Salma, B Hartiti, A Ziti, HJ Tchognia Nkuissi… - Applied Physics A, 2023 - Springer
In this research work, we used the Taguchi approach to find the optimal condition of
parameters to elaborate nanocrystalline of semiconductor Cu2ZnSnS4 (CZTS) using spray …

Optical and structural properties of CZTS thin films produced by electrodeposition

MGC Beh, B Hartiti, A Ziti, FK Konan, A Batan… - Materials Today …, 2024 - Elsevier
Copper-zinc-tin sulfide (Cu 2 ZnSnS 4 or CZTS), a quaternary compound, behaves as an
intrinsic p-type semiconductor, making it an attractive, cost-effective and environmentally …

Controllability study of copper‐tin‐sulphide (Cu3SnS4) material based on the ratio adjustment of Cu to Sn elements

M Dong, L Wei, Y Zhu - Micro & Nano Letters, 2023 - Wiley Online Library
The synthesis of pure phase Cu3SnS4 is of great significance for improving its material
properties. Here, the control law of Cu and Sn element ratio on the synthesis of pure phase …

Experimental and numerical simulation studies of CuO thin films based solar cells

N Benaissa, T Garmim, M El Boughdadi… - Engineering …, 2023 - iopscience.iop.org
This study presents an experimental investigation into the solar performance of copper oxide
(CuO) thin films. These CuO films were fabricated using the spray pyrolysis technique, and …

Enhanced performance of Cu2SnS3 absorber layer in SLG/Mo/Cu2SnS3/ZnS/ITO/Al structure: insights and optimisation using SCAPS-1D

SE Lachhab, A Bliya, K Nabaoui… - Australian Journal of …, 2024 - Taylor & Francis
In this paper, an in-depth numerical study was conducted to analyse the behaviour of the
electronic structure within the configuration of SLG/Mo/Cu2SnS3/ZnS/ITO/Al solar cells with …