The forming of textile reinforcements is an important stage in the manufacturing of textile
composite parts with Liquid Composite Molding process. Fiber orientations and part …

Ultrasonic welding is a joining technology suitable for carbon-fiber-reinforced thermoplastic
(CFRTP) components because of its high throughput, and ease of automation. An effective …

Abstract Fibre Metal Laminates are structures used primarily in aerospace applications
because of their principal advantages such as high strength, lower density, and impact …

In most current works related to the structure analysis of cured woven composites, the
influence of yarn angle variation on the local material properties is neglected. In this paper …

Ultrasonic welding has been widely used in joining plastic parts since it is fast, economical,
and suitable for automation. It also has great potential for joining thermoplastic composite …

Pre-impact fall detection can send alarm service faster to reduce long-lie conditions and
decrease the risk of hospitalization. Detecting various types of fall to determine the impact …

Dual-curable formulation was used to prepare epoxy prepregs with tailored tack and drape.
The obtained formulation had enhanced stability during the storage which eliminates the …

In this work, initially, the requirements on a simulation model of the non-isothermal stamp
forming process of unidirectional fiber-reinforced, and thermoplastic tape laminates are …

Preforming process would change yarn angle and yarn orientation, its influence on the
material properties and material orientations needs to be considered in the performance …

Limited material out‐life of thermoset prepregs is unavoidable attributed to the slow
crosslinking reaction between molecules and curing agents. Previous studies have explored …