Surface engineering of biomaterials in orthopedic and dental implants: Strategies to improve osteointegration, bacteriostatic and bactericidal activities
Z Liu, X Liu, S Ramakrishna - Biotechnology journal, 2021 - Wiley Online Library
Background The success of biomedical implants in orthopedic and dental applications is
usually limited due to insufficient bone‐implant integration, and implant‐related infections …
usually limited due to insufficient bone‐implant integration, and implant‐related infections …
A review of friction stir processing of structural metallic materials: Process, properties, and methods
AP Zykova, SY Tarasov, AV Chumaevskiy… - Metals, 2020 - mdpi.com
Friction stir processing (FSP) has attracted much attention in the last decade and contributed
significantly to the creation of functionally graded materials with both gradient structure and …
significantly to the creation of functionally graded materials with both gradient structure and …
Three interfaces of the dental implant system and their clinical effects on hard and soft tissues
Anatomically, the human tooth has structures both embedded within and forming part of the
exterior surface of the human body. When a tooth is lost, it is often replaced by a dental …
exterior surface of the human body. When a tooth is lost, it is often replaced by a dental …
[HTML][HTML] Electrochemical and surface characterization of anodized and fs-laser treated Ti6Al4V for osseo-repellent bone screws and dental implants
The surfaces of titanium grade 5 (Ti6Al4V) samples were altered on a micro and nano scale
by femtosecond laser irradiation and subsequent electrochemical anodization. The …
by femtosecond laser irradiation and subsequent electrochemical anodization. The …
Morphological, microstructural, mechanical, and electrochemical optimization of a novel Mg–2Ca–1Mn–1 Sr alloy by P ion implantation for orthopedic implants
This study investigates the influence of phosphorous (P) ion implantation on the
morphological, microstructural, mechanical, and electrochemical properties of a novel …
morphological, microstructural, mechanical, and electrochemical properties of a novel …
A comparison study on bioactivity and antibacterial properties of Ag-, Cu-and Zn-deposited oxide coatings produced on titanium
The aim of this study was to create antimicrobial and bioactive surfaces on the commercial
pure titanium (cp-Ti) surface for dental and orthopedic applications. Antibacterial and …
pure titanium (cp-Ti) surface for dental and orthopedic applications. Antibacterial and …
Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening
W Jia, Y Zan, C Mao, S Li, W Zhou, Q Li, S Zhang, V Ji - Vacuum, 2021 - Elsevier
Laser shock peening (LSP) is a novel surface treatment technique for strengthening metal
materials. The microstructural response of lamellar Ti834 alloy was investigated after treated …
materials. The microstructural response of lamellar Ti834 alloy was investigated after treated …
Properties of nanohydroxyapatite coatings doped with nanocopper, obtained by electrophoretic deposition on Ti13Zr13Nb alloy
Nowadays, hydroxyapatite coatings are the most common surface modification of long-term
implants. These coatings are characterized by high thickness and poor adhesion to the …
implants. These coatings are characterized by high thickness and poor adhesion to the …
Anodic Niobium–Titanium Oxide Crossbar Memristor Arrays for pH Sensing in Liquids
D Knapic, E Atanasova, I Zrinski… - … status solidi (a), 2024 - Wiley Online Library
Anodic Nb–Ti oxide crossbar memristor arrays are successfully produced on Si substrates.
Their use as pH sensors is tested by analyzing their current–voltage (I–U) sweeps in Ringer´ …
Their use as pH sensors is tested by analyzing their current–voltage (I–U) sweeps in Ringer´ …
Surface characterization of titanium-based substrates for orthopaedic applications
F Melo-Fonseca, M Gasik, S Madeira, FS Silva… - Materials …, 2021 - Elsevier
Orthopaedic implants for load-bearing applications are usually composed of titanium-based
materials. Aiming to propose a strategy able to improve the bone-implant interface on these …
materials. Aiming to propose a strategy able to improve the bone-implant interface on these …