Thin-ply composite laminates: a review
J Galos - Composite Structures, 2020 - Elsevier
Composite structures formed using thin-ply laminates are of interest to aerospace and other
high-performance industries. This paper reviews recently published research into fibre …
high-performance industries. This paper reviews recently published research into fibre …
[HTML][HTML] Developments in laminate modification of adhesively bonded composite joints
The use of carbon fibre reinforced polymer (CFRP) materials is increasing in many different
industries, such as those operating in the aviation, marine, and automotive sectors. In these …
industries, such as those operating in the aviation, marine, and automotive sectors. In these …
3D micromechanical progressive failure simulation for fiber-reinforced composites
In this paper, the recently developed two-dimensional (2D) phase field model is further
applied to study micromechanical progressive failure process in three-dimensional (3D) …
applied to study micromechanical progressive failure process in three-dimensional (3D) …
Characterisation and analysis of transverse crack-induced delamination in cross-ply composite laminates under fatigue loadings
PA Carraro, L Maragoni, M Quaresimin - International Journal of Fatigue, 2019 - Elsevier
The delamination growth represents one of the main phenomena involved in the fatigue
damage evolution in composite laminates. With the aim of characterising qualitatively and …
damage evolution in composite laminates. With the aim of characterising qualitatively and …
A study of the fracture mechanisms of hybrid carbon fiber reinforced polymer laminates reinforced by thin‐ply
The main stress component which creates delamination in bonded single lap joints with
composite adherends is the transverse tensile stress. Therefore, the following study …
composite adherends is the transverse tensile stress. Therefore, the following study …
Effect of metal layer placement on the damage and energy absorption mechanisms in aluminium/glass fibre laminates
This study focuses on the effect of metal layer distribution in glass fibre reinforced aluminium
laminates (GLARE) subjected to low velocity impact. Four GLARE variants specimens were …
laminates (GLARE) subjected to low velocity impact. Four GLARE variants specimens were …
Failure modes and strength prediction of thin ply CFRP angle-ply laminates
In this paper, the tensile strength and failure modes of thin ply carbon fiber-reinforced
polymer (CFRP) angle-ply laminates are investigated by experiments and predicted by …
polymer (CFRP) angle-ply laminates are investigated by experiments and predicted by …
Fatigue damage of cohesive interfaces in fiber-reinforced polymer composite laminates
SSR Koloor, MA Abdullah, MN Tamin… - Composites Science and …, 2019 - Elsevier
The weak interfaces in fiber-reinforced polymer (FRP) composite laminates often dictates the
reliability of the composite structures. In this respect, a new cyclic cohesive zone model …
reliability of the composite structures. In this respect, a new cyclic cohesive zone model …
[HTML][HTML] 3D 打印连续纤维增强复合材料研究现状综述
陈向明, 姚辽军, 果立成, 孙毅 - 2021 - hkxb.buaa.edu.cn
纤维增强复合材料因其优异的力学性能已被广泛应用于各工业领域, 但由于传统制造工艺的限制
, 复合材料依然无法应用于一些具有复杂构型的结构. 近年来, 3D 打印技术的快速发展有望实现 …
, 复合材料依然无法应用于一些具有复杂构型的结构. 近年来, 3D 打印技术的快速发展有望实现 …
Stiffness degradation of composite laminates due to matrix cracking and induced delamination during tension-tension fatigue
H Pakdel, B Mohammadi - Engineering Fracture Mechanics, 2019 - Elsevier
Degradation of mechanical properties of laminates during uniaxial tension-tension fatigue is
analytically and experimentally investigated. A unit-cell based stress analysis is developed …
analytically and experimentally investigated. A unit-cell based stress analysis is developed …