Biocompatibility testing for implants: A novel tool for selection and characterization

W Al-Zyoud, D Haddadin, SA Hasan, H Jaradat… - Materials, 2023 - mdpi.com
This review article dives into the complex world of biocompatibility testing: chemical,
mechanical, and biological characterization, including many elements of biocompatibility …

Corrosion behavior of titanium alloys in acidic and saline media: Role of alloy design, passivation integrity, and electrolyte modification

MO Bodunrin, LH Chown, JW Van Der Merwe… - Corrosion …, 2020 - degruyter.com
This paper presents an overview of the corrosion behavior of titanium (Ti) alloys in both
acidic and saline solutions. The solutions covered in this review are essentially the typical …

Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys

Z Wang, Q Fang, J Li, B Liu, Y Liu - Journal of Materials Science & …, 2018 - Elsevier
An analytical model is established to study the influence of lattice distortion and fraction of Hf
on the yield strength of the BCC TiNbTaZrHf x multi-component high entropy alloys (HEAs) …

Fully depleted Ti–Nb–Ta–Zr–O nanotubes: interfacial charge dynamics and solar hydrogen production

YH Chiu, TH Lai, CY Chen, PY Hsieh… - … applied materials & …, 2018 - ACS Publications
Poor kinetics of hole transportation at the electrode/electrolyte interface is regarded as a
primary cause for the mediocre performance of n-type TiO2 photoelectrodes. By adopting …

[HTML][HTML] Corrosion resistance of β-phase titanium alloys under simulated inflammatory conditions: Exploring the relevance of biocompatible alloying elements

A Sotniczuk, JL Gilbert, Y Liu, M Matczuk… - Corrosion …, 2023 - Elsevier
In this study we compared the corrosion behavior of single β-phase alloys:(i) Ti-29Nb-13Ta-
4.6 Zr and (ii) Ti-45Nb, that contain similar amount of β-phase stabilizers. Corrosion …

Study of the physicochemical and biological properties of the new promising Ti–20Nb–13Ta–5Zr alloy for biomedical applications

SV Konushkin, KV Sergiyenko, EO Nasakina… - Materials Chemistry and …, 2020 - Elsevier
A technology for producing a new homogeneous Ti–20Nb–13Ta–5Zr alloy has been
developed. It is shown that the alloy is single-phase with a β-Ti type crystal lattice. The alloy …

New Ti-6Al-2Nb-2Ta-1Mo alloy as implant biomaterial: In vitro corrosion and in vivo osseointegration evaluations

LC Trincă, D Mareci, C Solcan, M Fântânariu… - Materials Chemistry and …, 2020 - Elsevier
Over the last decade, new titanium alloys are developed in different areas of implantology.
The aim of this study was to characterize a new Ti-Al-Nb-Ta-Mo based alloy, with high …

Degradation characteristics of Mg0. 8Ca in saline solution with and without albumin protein investigated by electrochemical impedance spectroscopy

C Crimu, G Bolat, C Munteanu… - Materials and …, 2015 - Wiley Online Library
Biodegradable magnesium–calcium (MgCa) alloy is a very attractive biomaterial. Binary
Mg0. 8Ca alloy was fabricated. X‐ray diffraction (XRD) analysis and optical microscopy …

Microstructural, mechanical and anticorrosion characterisation of new CoCrNbMoZr alloy

SI Drob, C Vasilescu, M Andrei… - Materials and …, 2016 - Wiley Online Library
In this paper, the microstructure, mechanical and anticorrosive properties of the new
CoCrNbMoZr alloy were studied in comparison with those of the commercial CoCrMo …

[PDF][PDF] In vitro corrosion resistance and in vivo osseointegration testing of new multifunctional beta-type quaternary TiMoZrTa alloys

LC Trincă, D Mareci, C Solcan… - Mater. Sci. Eng. C …, 2020 - academia.edu
The present study explores the in vitro and in vivo responses of new multifunctional
quaternary beta-type TiMoZrTa alloys designed for biomedical implantation. The …