Nanotechnology in wood science: Innovations and applications
R Bansal, HC Barshilia, KK Pandey - International Journal of Biological …, 2024 - Elsevier
Application of nanomaterials is gaining tremendous interest in the field of wood science and
technology for value addition and enhancing performance of wood and wood-based …
technology for value addition and enhancing performance of wood and wood-based …
Influence of lignin content and pressing time on plywood properties bonded with cold-setting adhesive based on poly (vinyl alcohol), lignin, and hexamine
The sustainability, performance, and cost of production in the plywood industry depend on
wood adhesives and the hot-pressing process. In this study, a cold-setting plywood …
wood adhesives and the hot-pressing process. In this study, a cold-setting plywood …
Conversion of agro-industrial wastes of sorghum bagasse and molasses into lightweight roof tile composite
Particle of sorghum bagasse (SB) and molasses are by-products of sugar factories which
potential as resources to manufacture renewable composite. The aims of this study are to …
potential as resources to manufacture renewable composite. The aims of this study are to …
[PDF][PDF] Sudarmanto
MAR Lubis, A Labib - Akbar, F - academia.edu
The sustainability, performance, and cost of production in the plywood industry depend on
wood adhesives and the hot-pressing process. In this study, a cold-setting plywood …
wood adhesives and the hot-pressing process. In this study, a cold-setting plywood …
Effect of Glue Spread on Bonding Strength, Delamination, and Wood Failure of Jabon Wood-Based Cross-Laminated Timber Using Cold-Setting Melamine-Based …
Cross-laminated timber (CLT) has become a popular engineered wood product due to its
innovative properties and rapid development, which involves the use of various wood …
innovative properties and rapid development, which involves the use of various wood …
Advancing thermoset polymer composites with nanoclay reinforcement: a comprehensive investigation within composite interfaces
S Gillela, SM Yadav, BU Kelkar, K Sihag… - Composite …, 2024 - Taylor & Francis
In the last several decades, there has been significant growth in research and development
activities in nanomaterials. Nanotech has been used to improve the quality of several …
activities in nanomaterials. Nanotech has been used to improve the quality of several …
Optimization of areca leaf sheath nanolignin synthesis by a mechanical method for in situ modification of ultra-low molar ratio urea-formaldehyde adhesives
This study addresses the optimization of the nanolignin preparation method from the areca
leaf sheath (ALS) by a mechanical process using a high shear homogenizer at 13,000 …
leaf sheath (ALS) by a mechanical process using a high shear homogenizer at 13,000 …
Study on surface grafting of hydroxyapatite and its influence on the properties of urea-formaldehyde resin
W Zheng, T Hou, J Fan, G Wang, C Cai, Y Li… - International Journal of …, 2024 - Elsevier
Urea formaldehyde (UF) is the most widely used resin in the wood composite board industry.
UF has formaldehyde emission, which is harmful to the environment and human health. In …
UF has formaldehyde emission, which is harmful to the environment and human health. In …
Technological Properties of Formaldehyde Free Adhesives Based on Oxidized Starch Mixed with Different Crosslinkers for Plywood
AH Iswanto, MAR Lubis - Proceedings of the International Conference on …, 2022 - Springer
Formaldehyde-free adhesive based on oxidized starch (OS) adhesives was formulated at
different crosslinkers types and contents to replace urea–formaldehyde (UF) resins for …
different crosslinkers types and contents to replace urea–formaldehyde (UF) resins for …
[PDF][PDF] Physico-mechanical and thermal properties of thermoplastic poly (vinyl alcohol) modified thermosetting urea formaldehyde resin
Urea formaldehyde (UF) resins are brittle and to improve their tensile properties poly (vinyl
alcohol)(PVA) has been used to modify the UF resin. An easy improved procedure was …
alcohol)(PVA) has been used to modify the UF resin. An easy improved procedure was …